P0112 2006 Toyota Corolla Code - Intake Air Temperature Circuit Low Input 3ZZ-FE Engine
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2006 Toyota Corolla indicates Intake Air Temperature Circuit Low Input 3ZZ-FE Engine.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0112 2006 Toyota Corolla Description
What are the Possible Causes of the DTC P0112 2006 Toyota Corolla?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0112 2006 Toyota Corolla?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0112 2006 Toyota Corolla code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0112 2006 Toyota Corolla code?
Need more information on how to fix the P0112 2006 Toyota Corolla code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2006 Toyota Corolla code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2006 Toyota Corolla Code
1. What are the common symptoms of OBDII code P0112 in a 2006 Toyota Corolla?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What does the "Intake Air Temperature Circuit Low Input" mean in relation to code P0112 on a 2006 Toyota Corolla?
- This means that the Engine Control Module (ECM) has detected a lower than expected voltage from the Intake Air Temperature (IAT) sensor.
3. What are some possible causes of the P0112 code in a 2006 Toyota Corolla with the 3ZZ-FE engine?
- Possible causes include a faulty IAT sensor, damaged wiring or connectors in the IAT circuit, or a malfunctioning ECM.
4. How can I diagnose the cause of the P0112 code in my 2006 Toyota Corolla?
- You can start by visually inspecting the IAT sensor and its wiring for any visible damage. Using a multimeter, you can test the sensor's resistance and voltage to determine if it is functioning correctly.
5. Can I drive my 2006 Toyota Corolla with the P0112 code present?
- It is not recommended to drive your vehicle with the P0112 code present, as it can lead to further engine damage and poor performance.
6. Is it possible to reset the P0112 code in a 2006 Toyota Corolla without fixing the underlying issue?
- While you can clear the code using an OBDII scanner, the underlying issue causing the code will persist until it is properly diagnosed and repaired.
7. What are some DIY repair tips for fixing the P0112 code in a 2006 Toyota Corolla?
- DIY repair tips include checking and cleaning the IAT sensor, inspecting and repairing any damaged wiring or connectors, and ensuring proper connection to the ECM.
8. How much does it typically cost to repair the P0112 code in a 2006 Toyota Corolla at a professional mechanic?
- The cost of repair can vary depending on the exact cause of the issue, but it can range from $100 to $300 for parts and labor.
9. Can a faulty IAT sensor cause other issues in a 2006 Toyota Corolla besides triggering the P0112 code?
- Yes, a faulty IAT sensor can also cause issues such as incorrect fuel-air mixture, poor engine performance, and potential damage to the catalytic converter.
10. Is the P0112 code a common issue in 2006 Toyota Corollas with the 3ZZ-FE engine?
- The P0112 code is not extremely common in 2006 Toyota Corollas, but it can occur due to sensor failures or wiring issues over time.
Discuss the causes and fixes for P0112 2006 Toyota Corolla OBDII Code
Code P0112 2006 Toyota Corolla comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
