Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Before replacing the Mass Air Flow (MAF) sensor, try replacing the air filter and cleaning the Mass Air Flow sensor with Mass Air Flow sensor cleaner. Reset code and drive the vehicle. If the code comes back, it may be necessary to replace the Mass Air Flow sensor.
To diagnose the P0111 2007 Ford Fusion code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.
The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. The sensor detects intake air temperature and transmits a signal to the Powertrain Control Module (PCM). The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle. It is used by the Powertrain Control Module to assist with the calculation of idle speed, fuel mixture, and spark advance. The Diagnostic Trouble Code (DTC) will set when the PCM detects an excessively low or high voltage from the sensor.
Need more information on how to fix the P0111 2007 Ford Fusion code? Get Access to Factory Service Manuals
Get the P0111 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0111 2007 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks