AutoCodes – BMW – P0110 BMW

P0110 BMW Code - Intake Air Temperature Circuit Malfunction

Quick Answer

This Diagnostic Trouble Code (DTC) is stored in the Engine Control Module (ECM) when the output from the Intake Air Temperature (IAT) sensor is not as expected or missing. Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) sensor, Intake Air Temperature sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0110 BMW indicates Intake Air Temperature Circuit Malfunction.
Common causes: Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) sensor, Intake Air Temperature sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,866

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 02, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0110 BMW Description

This Diagnostic Trouble Code (DTC) is stored in the Engine Control Module (ECM) when the output from the Intake Air Temperature (IAT) sensor is not as expected or missing. The ECM uses information from the engine coolant temperature sensor and engine oil temperature sensor to carry out a plausibility check on the signal. The IAT sensors are normally negative temperature coefficient thermistors. The signal voltage drops as the intake air temperature increases. The intake air temperature sensor can be integrated into the Mass Air Flow (MAF) sensor, manifold absolute pressure sensor, or as a separate component. The signal from the sensor is used to adjust the ignition system dwell period (on a spark-ignition engine) and to measure the density of the intake air. This is important when used with a forced induction system, as the temperature of the air can increase after it has increased in pressure. The signal can also be used to calculate the desired output from the alternator when a smart charging system is used. The system can calculate the approximate temperature of the battery from this data.

OBDII Code P0110 BMW - Intake Air Temperature Circuit Malfunction - AutoCodes.com — P0110 BMW Code - Intake Air Temperature Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P0110 BMW?

Dirty air filter
Faulty Intake Air Temperature (IAT) sensor
Intake Air Temperature sensor harness is open or shorted
Intake Air Temperature sensor circuit poor electrical connection

How to Fix the DTC P0110 BMW?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0110 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0110 BMW code?

Need more information on how to fix the P0110 BMW code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0110 BMW code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0110 BMW Code

1. What are the common symptoms of OBDII code P0110 in a BMW related to Intake Air Temperature Circuit Malfunction?

- Common symptoms include rough idling, engine stalling, poor fuel efficiency, and possibly an illuminated check engine light.

2. What are the possible causes of the Intake Air Temperature Circuit Malfunction in a BMW triggering OBDII code P0110?

- The issue could be caused by a faulty intake air temperature sensor, damaged wiring or connectors, a malfunctioning engine control module (ECM), or a problem with the intake air temperature circuit.

3. How can I diagnose the Intake Air Temperature Circuit Malfunction causing OBDII code P0110 in my BMW?

- You can diagnose the issue by using a diagnostic scanner to read the code, checking the intake air temperature sensor for proper operation, inspecting the wiring and connectors for damage, and testing the ECM.

4. Can I still drive my BMW with OBDII code P0110 related to Intake Air Temperature Circuit Malfunction?

- It is not recommended to drive the vehicle with this code, as it can lead to poor performance and potential engine damage. It's best to address the issue promptly.

5. What are some repair tips for fixing OBDII code P0110 in a BMW due to Intake Air Temperature Circuit Malfunction?

- Repair tips include replacing the intake air temperature sensor, repairing any damaged wiring or connectors, resetting the ECM, and clearing the trouble code.

6. How much does it typically cost to repair OBDII code P0110 in a BMW caused by Intake Air Temperature Circuit Malfunction?

- The repair costs can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

7. Will resetting the check engine light resolve OBDII code P0110 related to Intake Air Temperature Circuit Malfunction in my BMW?

- Resetting the check engine light may temporarily turn it off, but it will not fix the underlying issue causing the code. Proper diagnosis and repair are necessary.

8. Can a DIY enthusiast fix OBDII code P0110 in a BMW related to Intake Air Temperature Circuit Malfunction?

- Depending on the skill level and tools available, some DIY enthusiasts may be able to address this issue by replacing the intake air temperature sensor or checking the wiring.

9. How long does it typically take to repair OBDII code P0110 caused by Intake Air Temperature Circuit Malfunction in a BMW?

- The repair time can vary based on the exact cause of the problem and the expertise of the technician, but it may take anywhere from 1 to 3 hours to fix this issue.

10. Is it necessary to visit a BMW dealership to address OBDII code P0110 related to Intake Air Temperature Circuit Malfunction?

- While a dealership may have specialized knowledge and parts, independent auto repair shops with experience in BMWs can also diagnose and repair this issue effectively.