AutoCodes - Toyota - P0110 2006 TOYOTA HIGHLANDER

P0110 2006 TOYOTA HIGHLANDER Code - Intake Air Temperature Circuit Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P0110 2006 TOYOTA HIGHLANDER code possible causes

  • Faulty Intake Air Temperature (IAT) sensor
  • Dirty air filter
  • Intake Air Temperature (IAT) sensor harness is open or shorted
  • Intake Air Temperature (IAT) sensor circuit poor electrical connection

|How do I fix the P0110 2006 TOYOTA HIGHLANDER code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0110 2006 TOYOTA HIGHLANDER code tech notes

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.

|Cost of diagnosing the P0110 2006 TOYOTA HIGHLANDER code

Labor: 1.0

The cost of diagnosing the P0110 2006 TOYOTA HIGHLANDER code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0110 2006 TOYOTA HIGHLANDER code detected?

An excessively low or high voltage from the sensor is sent to ECM.

|What are P0110 2006 TOYOTA HIGHLANDER code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|P0110 2006 TOYOTA HIGHLANDER code description

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM). The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.
OBDII Code P0110 2006 Toyota Highlander - Intake Air Temperature Circuit Malfunction - AutoCodes.com

|Need more information with the P0110 2006 TOYOTA HIGHLANDER code?

Need more information on how to fix the P0110 2006 TOYOTA HIGHLANDER code?
Get Access to Factory Service Manuals

|Need help with a P0110 2006 TOYOTA HIGHLANDER code?

Get the P0110 2006 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area

|P0110 2006 TOYOTA HIGHLANDER code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0110 2006 Toyota Highlander code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?