AutoCodesLincoln – P010E Lincoln

P010E Lincoln Code - Mass Or Volume Air Flow Sensor 'B' Circuit Intermittent/Erratic

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 2 Sensor 1 (MAF21), Mass Airflow Bank 2 Sensor 1 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P010E Lincoln indicates Mass Or Volume Air Flow Sensor 'B' Circuit Intermittent/Erratic.
Common causes
Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 2 Sensor 1 (MAF21), Mass Airflow Bank 2 Sensor 1 harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 206
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 21, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P010E Lincoln Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) will be set when a concern exists in the Mass Airflow Bank 2, Sensor 1 (MAF21) circuit, or the air tube containing the MAF21, causing an incorrect sensor output reading.
OBDII Code P010E Lincoln - Mass Or Volume Air Flow Sensor 'B' Circuit Intermittent/Erratic - AutoCodes.com
P010E Lincoln Code - Mass Or Volume Air Flow Sensor 'B' Circuit Intermittent/Erratic

What are the Possible Causes of the DTC P010E Lincoln?

  • Dirty Air Filter
  • Faulty Mass Airflow Bank 2 Sensor 1 (MAF21)
  • Mass Airflow Bank 2 Sensor 1 harness is open or shorted
  • Mass Airflow Bank 2 Sensor 1 circuit poor electrical connection

How to Fix the DTC P010E Lincoln?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P010E Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P010E Lincoln code?

Need more information on how to fix the P010E Lincoln code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010E Lincoln code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010E Lincoln Code

1. What does the OBDII code P010E mean on a Lincoln?

P010E indicates that the Mass or Volume Air Flow Sensor 'B' circuit is experiencing intermittent or erratic signals.

2. What are the common symptoms of code P010E in a Lincoln?

Symptoms may include poor engine performance, rough idling, decreased fuel efficiency, and the Check Engine Light turning on.

3. What causes the P010E code to appear in a Lincoln vehicle?

Common causes include a faulty MAF sensor, damaged wiring or connectors, intake air leaks, or contamination on the sensor.

4. Can I drive my Lincoln with a P010E code?

Driving with this code is possible but not recommended, as it can lead to poor fuel economy, reduced performance, and potential damage to other components.

5. How can I fix the P010E code on my Lincoln?

Start by inspecting the MAF sensor and its wiring for damage or dirt. Clean the sensor if dirty, repair damaged wires, or replace the sensor if faulty.

6. How do I clean a Mass Air Flow (MAF) sensor to resolve P010E?

Use a MAF sensor cleaner spray to gently clean the sensor without touching its internal components, then let it dry completely before reinstalling.

7. Can a vacuum leak cause the P010E code on my Lincoln?

Yes, a vacuum or intake leak can cause erratic airflow readings, triggering the P010E code.

8. How much does it cost to repair the P010E code in a Lincoln?

Repair costs vary but typically range from $100 to $300, depending on whether you need to clean, repair, or replace the MAF sensor.

9. Do I need a professional mechanic to fix the P010E code?

While basic troubleshooting like cleaning the MAF sensor can be done at home, complex wiring issues or sensor replacements may require a mechanic.

10. How can I prevent the P010E code from recurring in my Lincoln?

Regularly inspect and clean the MAF sensor, ensure proper air filter maintenance, and check for intake system leaks.

Discuss the causes and fixes for P010E Lincoln OBDII Code

Code P010E Lincoln comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play