AutoCodes – Ford – P010D 2015 Ford F150

P010D 2015 Ford F150 Code - Mass Or Volume Air Flow Sensor 'B' Circuit High

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 2 Sensor 1 (MAF21), Mass Airflow Bank 2 Sensor 1 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P010D 2015 Ford F150 indicates Mass Or Volume Air Flow Sensor 'B' Circuit High.
Common causes: Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 2 Sensor 1 (MAF21), Mass Airflow Bank 2 Sensor 1 harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 184

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P010D 2015 Ford F150 Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) will be set when the Mass Airflow Bank 2, Sensor 1/Intake Air Temperature Bank 2, Sensor 1 (MAF21/IAT21) output changes above a maximum calibrated limit while the engine is running.

OBDII Code P010D 2015 Ford F150 - Mass Or Volume Air Flow Sensor 'B' Circuit High - AutoCodes.com — P010D 2015 Ford F150 Code - Mass Or Volume Air Flow Sensor 'B' Circuit High

What does this mean?

What are the Possible Causes of the DTC P010D 2015 Ford F150?

Dirty Air Filter
Faulty Mass Airflow Bank 2 Sensor 1 (MAF21)
Mass Airflow Bank 2 Sensor 1 harness is open or shorted
Mass Airflow Bank 2 Sensor 1 circuit poor electrical connection

How to Fix the DTC P010D 2015 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low-compressed air or a Mass Air Flow Sensor Cleaner. Reset the code and drive the vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P010D 2015 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P010D 2015 Ford F150 code?

Need more information on how to fix the P010D 2015 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010D 2015 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010D 2015 Ford F150 Code

1. What are the common symptoms of OBDII code P010D on a 2015 Ford F150?

- Common symptoms include poor engine performance, reduced fuel efficiency, stalling, and illuminated Check Engine Light.

2. What does the OBDII code P010D for a 2015 Ford F150 indicate?

- The code P010D indicates an issue with the Mass or Volume Air Flow Sensor 'B' Circuit registering a high input.

3. What are the possible causes of OBDII code P010D on a 2015 Ford F150?

- Possible causes include a faulty Mass Air Flow (MAF) sensor, damaged wiring or connectors, intake air leaks, or a problem with the sensor circuit.

4. How can I diagnose the Mass Or Volume Air Flow Sensor 'B' Circuit High issue on my 2015 Ford F150?

- Diagnosis typically involves checking the MAF sensor's wiring and connectors for damage, testing sensor functionality, and inspecting for any air leaks in the intake system.

5. Can a dirty air filter cause OBDII code P010D on a 2015 Ford F150?

- Yes, a dirty air filter can disrupt airflow and affect the MAF sensor readings, potentially triggering code P010D.

6. What are the repair options for resolving OBDII code P010D on a 2015 Ford F150?

- Repair options include cleaning or replacing the MAF sensor, repairing damaged wiring or connectors, fixing any air leaks, and clearing the trouble codes.

7. Is it safe to continue driving with OBDII code P010D present on a 2015 Ford F150?

- It is generally not recommended to drive with unresolved OBDII codes, as they can lead to further engine problems and decreased efficiency.

8. Can resetting the OBDII system clear code P010D on a 2015 Ford F150?

- Resetting the system may temporarily clear the code, but if the underlying issue persists, the code is likely to reappear.

9. How much does it typically cost to repair OBDII code P010D on a 2015 Ford F150?

- The cost of repairing code P010D can vary depending on the exact cause and whether you perform the repairs yourself or take your vehicle to a mechanic. Costs may range from $50 for a DIY fix to a few hundred dollars for professional repairs.

10. How can I prevent OBDII code P010D from recurring on my 2015 Ford F150 in the future?

- Regularly inspect and maintain your vehicle's air filter, address any intake air leaks promptly, and follow the manufacturer's recommended maintenance schedule to help prevent code P010D from recurring.