AutoCodesLincoln – P010C Lincoln

P010C Lincoln Code - Mass Or Volume Air Flow Sensor 'B' Circuit Low

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 2 Sensor 1 (MAF21), Mass Airflow Bank 2 Sensor 1 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P010C Lincoln indicates Mass Or Volume Air Flow Sensor 'B' Circuit Low.
Common causes
Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 2 Sensor 1 (MAF21), Mass Airflow Bank 2 Sensor 1 harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 228
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 21, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P010C Lincoln Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) will be set when during Key ON, Engine Running (KOER), the Mass Airflow Bank 2, Sensor 1 (MAF21) output changes below a minimum calibrated limit for greater than a set period of time.
OBDII Code P010C Lincoln - Mass Or Volume Air Flow Sensor 'B' Circuit Low - AutoCodes.com
P010C Lincoln Code - Mass Or Volume Air Flow Sensor 'B' Circuit Low

What are the Possible Causes of the DTC P010C Lincoln?

  • Dirty Air Filter
  • Faulty Mass Airflow Bank 2 Sensor 1 (MAF21)
  • Mass Airflow Bank 2 Sensor 1 harness is open or shorted
  • Mass Airflow Bank 2 Sensor 1 circuit poor electrical connection

How to Fix the DTC P010C Lincoln?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P010C Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P010C Lincoln code?

Need more information on how to fix the P010C Lincoln code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010C Lincoln code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010C Lincoln Code

What does the OBDII code P010C mean on a Lincoln?

The P010C code indicates a problem with the "Mass or Volume Air Flow Sensor 'B' Circuit Low," meaning the signal from the MAF sensor is lower than expected.

What are the common symptoms of the P010C code in a Lincoln?

Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, hesitation during acceleration, and the check engine light turning on.

What causes the P010C code to appear on a Lincoln?

Possible causes include a faulty MAF sensor, wiring or connector issues, a clogged air filter, or intake system air leaks.

How can I fix the P010C code on my Lincoln?

Start by inspecting and cleaning the MAF sensor, checking the wiring and connectors for damage, replacing a clogged air filter, and addressing any intake leaks.

Can I drive my Lincoln with the P010C code active?

Driving with this code is not recommended as it may lead to poor engine performance and potential damage to other components over time.

How do I diagnose the P010C code on a Lincoln?

Use an OBDII scanner to confirm the code, then visually inspect the MAF sensor, wiring, and air intake system. Testing the MAF sensor with a multimeter may also help.

Is the P010C code specific to Lincoln vehicles?

No, the P010C code is a generic OBDII code that can appear on various makes and models, but the diagnostic and repair process may vary slightly.

How much does it cost to fix the P010C code on a Lincoln?

Repair costs depend on the root cause, ranging from $20 for an air filter replacement to $200–$400 for a new MAF sensor, plus labor costs.

Can a dirty air filter cause the P010C code on a Lincoln?

Yes, a dirty or clogged air filter can restrict airflow to the MAF sensor, potentially triggering the P010C code.

What tools do I need to fix the P010C code on a Lincoln?

You may need an OBDII scanner, a multimeter, a screwdriver or wrench set, and MAF sensor cleaner to diagnose and fix the issue.

Discuss the causes and fixes for P010C Lincoln OBDII Code

Code P010C Lincoln comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play