P010B 2011 Infiniti G37_sedan Code - Mass Air Flow Circuit Range/Performance Bank 2
Quick Answer
The Mass Air Flow (MAF) sensor is placed in the stream of intake air. Common causes include Faulty Mass Air Flow (MAF) sensor, Intake air leaks, Dirty Mass Air Flow sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P010B 2011 Infiniti G37_sedan indicates Mass Air Flow Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Mass Air Flow (MAF) sensor, Intake air leaks, Dirty Mass Air Flow sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P010B 2011 Infiniti G37_sedan Description
The temperature of the hot film is controlled by the ECM a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change.
What are the Possible Causes of the DTC P010B 2011 Infiniti G37_sedan?
- Faulty Mass Air Flow (MAF) sensor
- Intake air leaks
- Dirty Mass Air Flow sensor
- Dirty air filter
- Mass Air Flow sensor harness is open or shorted
- Mass Air Flow sensor circuit poor electrical connection
How to Fix the DTC P010B 2011 Infiniti G37_sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P010B 2011 Infiniti G37_sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P010B 2011 Infiniti G37_sedan code?
Need more information on how to fix the P010B 2011 Infiniti G37_sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P010B 2011 Infiniti G37_sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P010B 2011 Infiniti G37_sedan Code
1. What are the common symptoms of OBDII code P010B in a 2011 Infiniti G37 sedan?
- Common symptoms include reduced engine performance, rough idling, stalling, and potential fuel economy issues.
2. What does the OBDII code P010B indicate in a 2011 Infiniti G37 sedan?
- The code P010B indicates a problem with the Mass Air Flow (MAF) sensor circuit range or performance on Bank 2 of the engine.
3. What are the possible causes of OBDII code P010B in a 2011 Infiniti G37 sedan?
- Possible causes include a faulty MAF sensor, wiring or connector issues, vacuum leaks, intake air leaks, or a dirty/clogged air filter.
4. How can I diagnose the OBDII code P010B in my 2011 Infiniti G37 sedan?
- You can diagnose the code by inspecting the MAF sensor, checking for any damaged wires or connectors, conducting a smoke test for vacuum leaks, and ensuring the air filter is clean.
5. Can a dirty air filter trigger the OBDII code P010B in a 2011 Infiniti G37 sedan?
- Yes, a dirty or clogged air filter can disrupt the airflow readings to the MAF sensor, potentially triggering the P010B code.
6. How serious is the OBDII code P010B in a 2011 Infiniti G37 sedan?
- While the vehicle may still be operable with the code present, it is important to address the issue promptly to prevent further engine performance issues and potential damage.
7. Is it safe to drive my 2011 Infiniti G37 sedan with the OBDII code P010B active?
- It is generally not recommended to drive with the code active, as it can lead to reduced engine performance and potential long-term damage if left unresolved.
8. Can I clear the OBDII code P010B in my 2011 Infiniti G37 sedan with a simple reset?
- Clearing the code with a reset may temporarily turn off the warning light, but if the underlying issue causing the code is not fixed, it is likely to reappear.
9. How much does it typically cost to repair the OBDII code P010B in a 2011 Infiniti G37 sedan?
- Repair costs can vary depending on the exact cause of the issue, but expect to pay for parts and labor, with estimates ranging from $100 to $500 or more.
10. Can I fix the OBDII code P010B in my 2011 Infiniti G37 sedan myself?
- If you have experience with automotive repairs and the necessary tools, you may be able to address some of the common causes of the P010B code yourself, such as cleaning the MAF sensor or replacing the air filter.
Discuss the causes and fixes for P010B 2011 Infiniti G37_sedan OBDII Code
Code P010B 2011 Infiniti G37_sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
