P0109 2007 Ford Fusion Code - Manifold Absolute Pressure/Barometric Pressure Sensor Intermittent
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0109 2007 Ford Fusion indicates Manifold Absolute Pressure/Barometric Pressure Sensor Intermittent.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0109 2007 Ford Fusion Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is failing intermittently.
What are the Possible Causes of the DTC P0109 2007 Ford Fusion?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0109 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0109 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0109 2007 Ford Fusion code?
Need more information on how to fix the P0109 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0109 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0109 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P0109 on a 2007 Ford Fusion?
- Common symptoms include rough idling, poor acceleration, stalling, and decreased fuel efficiency.
2. What does the OBDII code P0109 on a 2007 Ford Fusion indicate?
- This code indicates an intermittent issue with the Manifold Absolute Pressure/Barometric Pressure Sensor.
3. What are the possible causes of OBDII code P0109 on a 2007 Ford Fusion?
- Possible causes include a faulty MAP/BARO sensor, damaged wiring or connectors, vacuum leaks, or issues with the PCM.
4. How can I diagnose the cause of OBDII code P0109 on my 2007 Ford Fusion?
- Diagnose by visually inspecting sensor connections, checking for vacuum leaks, testing sensor functionality, and using a scan tool to monitor sensor data.
5. Can I still drive my 2007 Ford Fusion with OBDII code P0109 present?
- It is not recommended to drive with this code present, as it can lead to poor engine performance and potentially cause further damage.
6. How do I repair OBDII code P0109 on a 2007 Ford Fusion?
- Repair involves replacing the faulty MAP/BARO sensor, repairing any damaged wiring or connectors, fixing vacuum leaks, or addressing PCM issues.
7. Is it possible to reset OBDII code P0109 on a 2007 Ford Fusion by clearing the codes?
- Clearing the codes may temporarily turn off the check engine light, but the underlying issue causing the code will need to be addressed to prevent it from returning.
8. Can a DIY enthusiast fix OBDII code P0109 on a 2007 Ford Fusion?
- Depending on the cause, some DIY enthusiasts may be able to fix this code by replacing the sensor or repairing simple wiring issues. More complex problems may require professional assistance.
9. How much does it cost to repair OBDII code P0109 on a 2007 Ford Fusion?
- The cost of repair can vary depending on the cause of the issue, but it typically ranges from $100 to $300 for parts and labor.
10. How often does OBDII code P0109 occur in 2007 Ford Fusion vehicles?
- While the frequency can vary, it is not an uncommon code to encounter in 2007 Ford Fusion vehicles with aging sensors or wiring issues.
Discuss the causes and fixes for P0109 2007 Ford Fusion OBDII Code
Code P0109 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
