P0107 Mazda Code - Manifold Absolute Pressure Sensor Circuit Low Voltage
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 Mazda indicates Manifold Absolute Pressure Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0107 Mazda Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is less than 0.15 V for greater than 13 ms.
What are the Possible Causes of the DTC P0107 Mazda?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0107 Mazda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0107 Mazda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0107 Mazda code?
Need more information on how to fix the P0107 Mazda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 Mazda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 Mazda Code
1. What are common symptoms of OBDII code P0107 in a Mazda related to the Manifold Absolute Pressure Sensor Circuit Low Voltage?
- Common symptoms include poor engine performance, reduced fuel efficiency, stalling, and rough idling.
2. What are potential causes of the OBDII code P0107 in a Mazda?
- Potential causes include a faulty manifold absolute pressure sensor, damaged sensor wiring, vacuum leaks, or issues with the engine control module.
3. How can I diagnose the cause of OBDII code P0107 in my Mazda?
- Diagnose the issue by checking the sensor's wiring for damage, inspecting for vacuum leaks, testing the sensor's voltage output, and scanning for other related trouble codes.
4. Can I drive my Mazda with the OBDII code P0107 present?
- It is not recommended to drive your vehicle with this code present, as it can lead to further engine damage and poor performance.
5. How can I repair the Manifold Absolute Pressure Sensor Circuit Low Voltage issue in my Mazda?
- Repair options include replacing the faulty manifold absolute pressure sensor, repairing damaged wiring, fixing vacuum leaks, or reprogramming the engine control module.
6. Will resetting the OBDII code P0107 in my Mazda make the issue go away?
- Resetting the code may temporarily clear the fault, but the underlying issue causing the code will likely reappear without proper diagnosis and repair.
7. Are there any preventive measures to avoid OBDII code P0107 in my Mazda?
- Regular maintenance, such as checking for vacuum leaks and ensuring proper sensor function, can help prevent the occurrence of this code.
8. Can a DIY enthusiast fix the OBDII code P0107 in a Mazda?
- Depending on the skill level and tools available, a DIY enthusiast may be able to diagnose and repair this code, but professional assistance may be required for more complex issues.
9. How much does it typically cost to repair the Manifold Absolute Pressure Sensor Circuit Low Voltage issue in a Mazda?
- Repair costs can vary but typically range from $100 to $300, including parts and labor, depending on the specific cause of the code.
10. Will the OBDII code P0107 in my Mazda cause the Check Engine light to illuminate?
- Yes, this code will trigger the Check Engine light to illuminate on the dashboard of your Mazda.
Discuss the causes and fixes for P0107 Mazda OBDII Code
-
all the symptoms correspond to the fault. diagnose mazda bt 50 Fault in one sensor with fixed attached map measures does not accuse the check as measured by but the engine lost power and black smokes . sensor fails changed resolved thanks for the info .
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
