P0107 2018 Honda CR-V Code - Manifold Absolute Pressure Sensor Circuit Low Voltage
Quick Answer
The Manifold Absolute Pressure (MAP) Sensor measures the pressure or vacuum in the manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 2018 Honda CR-V indicates Manifold Absolute Pressure Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0107 2018 Honda CR-V Description
What are the Possible Causes of the DTC P0107 2018 Honda CR-V?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0107 2018 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0107 2018 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0107 2018 Honda CR-V code?
Need more information on how to fix the P0107 2018 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 2018 Honda CR-V Code
1. What are the common symptoms of OBDII code P0107 on a 2018 Honda CR-V?
The common symptoms of code P0107 include poor engine performance, rough idling, stalling, reduced fuel efficiency, and the illumination of the check engine light.
2. What does the OBDII code P0107 on a 2018 Honda CR-V indicate?
Code P0107 indicates a low voltage condition in the Manifold Absolute Pressure (MAP) sensor circuit of the vehicle.
3. What are the possible causes of OBDII code P0107 on a 2018 Honda CR-V?
Possible causes of code P0107 include a faulty MAP sensor, damaged wiring or connectors in the sensor circuit, vacuum leaks, or issues with the engine's air intake system.
4. How can I diagnose the OBDII code P0107 on my 2018 Honda CR-V?
Diagnosing code P0107 involves checking the MAP sensor for proper operation, inspecting the sensor wiring and connectors for damage, and ensuring there are no vacuum leaks in the system.
5. Can I drive my 2018 Honda CR-V with OBDII code P0107?
It is not recommended to drive your vehicle with code P0107 as it can lead to further engine issues and potential damage. It is best to address the underlying problem promptly.
6. How can I repair OBDII code P0107 on my 2018 Honda CR-V?
Repairing code P0107 may involve replacing the faulty MAP sensor, repairing any damaged wiring or connectors, fixing vacuum leaks, or addressing issues in the air intake system.
7. Is it possible to reset OBDII code P0107 on a 2018 Honda CR-V without fixing the underlying issue?
While you can clear the code using an OBDII scanner, the check engine light may reappear if the underlying problem causing code P0107 is not addressed.
8. Can a dirty air filter cause OBDII code P0107 on a 2018 Honda CR-V?
A dirty air filter may not directly cause code P0107, but it can affect the overall performance of the engine, potentially leading to issues that trigger the code.
9. How much does it cost to repair OBDII code P0107 on a 2018 Honda CR-V?
The cost of repairing code P0107 can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.
10. Will OBDII code P0107 on a 2018 Honda CR-V affect the vehicle's emissions?
Yes, code P0107 can affect the vehicle's emissions by causing improper air-to-fuel ratios and incomplete combustion, leading to increased emissions.
Discuss the causes and fixes for P0107 2018 Honda CR-V OBDII Code
Code P0107 2018 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
