AutoCodes – Ford – P0107 2011 Ford Fusion

P0107 2011 Ford Fusion Code - Manifold Absolute Pressure/Barometric Pressure Sensor Low Input

Quick Answer

The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0107 2011 Ford Fusion indicates Manifold Absolute Pressure/Barometric Pressure Sensor Low Input.
Common causes: Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,543

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 20, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0107 2011 Ford Fusion Description

The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Pressure in the intake manifold is affected by engine speed, throttle opening, air temperature, Barometric Pressure (BARO) and if equipped, turbocharger output. A diaphragm within the MAP sensor is displaced by the pressure changes that occur from the varying load and operating conditions of the engine. The sensor translates this action into electrical resistance.
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is less than 0.15 V for greater than 13 ms.

OBDII Code P0107 2011 Ford Fusion - Manifold Absolute Pressure/Barometric Pressure Sensor Low Input - AutoCodes.com — P0107 2011 Ford Fusion Code - Manifold Absolute Pressure/Barometric Pressure Sensor Low Input

What does this mean?

What are the Possible Causes of the DTC P0107 2011 Ford Fusion?

Faulty Manifold Absolute Pressure (MAP) Sensor
Manifold Absolute Pressure Sensor harness is open or shorted
Manifold Absolute Pressure Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0107 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

You can try to clean the MAP (Manifold Absolute Pressure) sensor with a mass air flow sensor cleaner.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0107 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0107 2011 Ford Fusion code?

Need more information on how to fix the P0107 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0107 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0107 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P0107 in a 2011 Ford Fusion?

- Common symptoms include reduced engine performance, poor fuel economy, stalling, rough idling, and possibly an illuminated check engine light.

2. What does the OBDII code P0107 for a 2011 Ford Fusion indicate?

- The code P0107 specifically points to an issue with the Manifold Absolute Pressure (MAP) sensor or Barometric Pressure (BARO) sensor signal being lower than expected.

3. What are the possible causes of the Manifold Absolute Pressure/Barometric Pressure Sensor Low Input code in a 2011 Ford Fusion?

- Causes may include a faulty MAP/BARO sensor, damaged or disconnected sensor wiring, intake manifold leaks, clogged air filter, or a problem with the engine's vacuum system.

4. How can I diagnose the OBDII code P0107 in my 2011 Ford Fusion?

- Diagnosis typically involves checking the sensor's wiring and connections, inspecting the intake system for leaks, testing the sensor's voltage output, and using a scan tool to monitor sensor readings.

5. Can I drive my 2011 Ford Fusion with the P0107 code?

- It is not recommended to drive your vehicle with the P0107 code, as it can lead to performance issues and potential damage to the engine. It's best to address the underlying problem promptly.

6. How do I repair the Manifold Absolute Pressure/Barometric Pressure Sensor Low Input code in my 2011 Ford Fusion?

- Repair steps may include replacing the faulty MAP/BARO sensor, repairing damaged wiring, fixing intake leaks, replacing the air filter, or addressing any vacuum system issues.

7. Will resetting the check engine light fix the P0107 code in my 2011 Ford Fusion?

- Simply resetting the check engine light will not fix the underlying issue causing the P0107 code. It's important to diagnose the problem and perform the necessary repairs to address the code.

8. Can a DIY enthusiast fix the P0107 code in a 2011 Ford Fusion?

- Depending on your skills and experience, some DIY enthusiasts may be able to address the P0107 code by following repair guides and using the appropriate tools. However, complex issues may require professional assistance.

9. How much does it cost to repair the Manifold Absolute Pressure/Barometric Pressure Sensor Low Input code in a 2011 Ford Fusion?

- The cost of repairs can vary based on the specific cause of the code and whether you choose to do the repairs yourself or seek help from a mechanic. Costs may range from a few dollars for simple fixes to a few hundred dollars for more involved repairs.

10. Does the OBDII code P0107 in a 2011 Ford Fusion affect emissions or vehicle safety?

- While the P0107 code may not directly impact emissions or safety, it can lead to reduced engine performance and potential drivability issues. Resolving the code promptly is recommended to maintain your vehicle's overall functionality.