P0107 2008 Honda Accord Code - Manifold Absolute Pressure Sensor Circuit Low Voltage
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 2008 Honda Accord indicates Manifold Absolute Pressure Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0107 2008 Honda Accord Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is less than 0.15 V for greater than 13 ms.
What are the Possible Causes of the DTC P0107 2008 Honda Accord?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0107 2008 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0107 2008 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0107 2008 Honda Accord code?
Need more information on how to fix the P0107 2008 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 2008 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 2008 Honda Accord Code
1. What does OBDII code P0107 on a 2008 Honda Accord mean?
- OBDII code P0107 indicates a problem with the Manifold Absolute Pressure (MAP) sensor circuit, specifically low voltage.
2. What are the common symptoms of a P0107 code on a 2008 Honda Accord?
- Common symptoms of a P0107 code include poor engine performance, rough idling, stalling, and decreased fuel efficiency.
3. What are the possible causes of a P0107 code on a 2008 Honda Accord?
- The P0107 code on a 2008 Honda Accord can be caused by a faulty MAP sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine's computer.
4. How can I diagnose a P0107 code on my 2008 Honda Accord?
- To diagnose a P0107 code, you can use an OBDII scanner to read the code and check the voltage output of the MAP sensor using a multimeter. Inspect the wiring and connectors for any signs of damage.
5. How can I repair a P0107 code on my 2008 Honda Accord?
- Repair options for a P0107 code may include replacing the MAP sensor, repairing or replacing damaged wiring or connectors, or resetting the engine's computer after addressing the issue.
6. Can a P0107 code on a 2008 Honda Accord cause damage to the engine?
- While a P0107 code itself may not directly damage the engine, it can lead to poor engine performance and fuel inefficiency if not addressed promptly.
7. Can I drive my 2008 Honda Accord with a P0107 code?
- It is not recommended to drive your 2008 Honda Accord with a P0107 code, as it can lead to further engine problems and potentially unsafe driving conditions.
8. How much does it cost to repair a P0107 code on a 2008 Honda Accord?
- The cost of repairing a P0107 code on a 2008 Honda Accord can vary depending on the cause of the issue and the repair shop, but it may range from $100 to $300 or more.
9. Will resetting the OBDII system clear a P0107 code on a 2008 Honda Accord?
- Resetting the OBDII system may temporarily clear the P0107 code, but if the underlying issue is not addressed, the code is likely to reappear during driving.
10. How often does a P0107 code occur in a 2008 Honda Accord?
- The occurrence of a P0107 code in a 2008 Honda Accord can vary depending on the vehicle's condition and maintenance history, but it is relatively common among vehicles with sensor circuit issues.
Discuss the causes and fixes for P0107 2008 Honda Accord OBDII Code
Code P0107 2008 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
