P0107 2007 Ford Fusion Code - Manifold Absolute Pressure/Barometric Pressure Sensor Low Input
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 2007 Ford Fusion indicates Manifold Absolute Pressure/Barometric Pressure Sensor Low Input.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0107 2007 Ford Fusion Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is less than 0.15 V for greater than 13 ms.
What are the Possible Causes of the DTC P0107 2007 Ford Fusion?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0107 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0107 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0107 2007 Ford Fusion code?
Need more information on how to fix the P0107 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P0107 on a 2007 Ford Fusion?
- Common symptoms include poor engine performance, rough idling, stalling, decreased fuel efficiency, and the Check Engine Light illuminating.
2. What does the OBDII code P0107 for a 2007 Ford Fusion mean?
- The code P0107 indicates a low input signal from the Manifold Absolute Pressure (MAP) or Barometric Pressure Sensor.
3. What are the possible causes of OBDII code P0107 on a 2007 Ford Fusion?
- The common causes include a faulty MAP sensor, damaged sensor wiring, vacuum leaks, or issues with the engine's intake system.
4. How can I diagnose the OBDII code P0107 on my 2007 Ford Fusion?
- You can use an OBDII scanner to read the trouble code, visually inspect the sensor and its wiring for any damage, and check for vacuum leaks in the intake system.
5. Can I drive my 2007 Ford Fusion with the OBDII code P0107?
- It is not recommended to drive with the P0107 code present, as it can lead to poor engine performance and potential damage if not addressed promptly.
6. How can I repair the Manifold Absolute Pressure sensor low input issue on my 2007 Ford Fusion?
- Repair options include replacing the faulty MAP sensor, repairing or replacing damaged wiring, fixing any vacuum leaks, and clearing the trouble code with an OBDII scanner.
7. Is it possible to reset the OBDII code P0107 on a 2007 Ford Fusion without fixing the issue?
- While you can temporarily clear the code with an OBDII scanner, it is crucial to address the underlying problem to prevent further issues with your vehicle.
8. Can a dirty air filter cause the OBDII code P0107 on a 2007 Ford Fusion?
- Yes, a dirty air filter can restrict airflow to the engine, affecting the MAP sensor's readings and potentially triggering the P0107 trouble code.
9. How much does it typically cost to repair the OBDII code P0107 on a 2007 Ford Fusion?
- The cost of repair can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.
10. Will the OBDII code P0107 on a 2007 Ford Fusion reset itself after the issue is fixed?
- In some cases, the Check Engine Light may go off after a few drive cycles once the underlying problem causing the P0107 code is resolved.
Discuss the causes and fixes for P0107 2007 Ford Fusion OBDII Code
Code P0107 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
