P0107 2000 Honda Civic Code - Manifold Absolute Pressure Sensor Circuit Low Voltage
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 2000 Honda Civic indicates Manifold Absolute Pressure Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0107 2000 Honda Civic Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is less than 0.15 V for greater than 13 ms.
What are the Possible Causes of the DTC P0107 2000 Honda Civic?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0107 2000 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0107 2000 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0107 2000 Honda Civic code?
Need more information on how to fix the P0107 2000 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 2000 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 2000 Honda Civic Code
1. What are the common symptoms of OBDII code P0107 on a 2000 Honda Civic?
- Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and stalling.
2. What does the OBDII code P0107 on a 2000 Honda Civic indicate?
- The code P0107 indicates a low voltage condition in the Manifold Absolute Pressure (MAP) sensor circuit.
3. What are the possible causes of the P0107 code on a 2000 Honda Civic?
- Possible causes include a faulty MAP sensor, damaged or disconnected wiring in the sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the cause of the P0107 code on my 2000 Honda Civic?
- To diagnose the issue, you can use a scan tool to monitor the MAP sensor voltage, visually inspect the sensor and its wiring for damage, and perform continuity tests on the circuit.
5. Can I still drive my 2000 Honda Civic with the P0107 code present?
- It is not recommended to drive the vehicle with the P0107 code present, as it can lead to further engine damage and potential safety hazards.
6. How do I repair the P0107 code on my 2000 Honda Civic?
- Repairing the P0107 code may involve replacing the MAP sensor, repairing or replacing damaged wiring, or resetting the ECM after addressing the underlying issue.
7. Are there any DIY tips for fixing the P0107 code on a 2000 Honda Civic?
- DIY tips include checking for loose or damaged connections, cleaning the sensor connector, and ensuring proper grounding of the sensor.
8. Can a dirty air filter cause the P0107 code on a 2000 Honda Civic?
- While a dirty air filter can affect engine performance, it is not a common cause of the P0107 code. Focus on inspecting the MAP sensor and its circuitry first.
9. Will resetting the OBDII system clear the P0107 code on a 2000 Honda Civic?
- Resetting the OBDII system may temporarily clear the code, but it will likely reappear if the underlying issue with the MAP sensor circuit is not resolved.
10. How much does it typically cost to repair the P0107 code on a 2000 Honda Civic?
- The cost of repairing the P0107 code can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
Discuss the causes and fixes for P0107 2000 Honda Civic OBDII Code
Code P0107 2000 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
