P0107 1999 Honda Civic Code - Manifold Absolute Pressure Sensor Circuit Low Voltage
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0107 1999 Honda Civic indicates Manifold Absolute Pressure Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0107 1999 Honda Civic Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAP Sensor voltage is less than 0.15 V for greater than 13 ms.
What are the Possible Causes of the DTC P0107 1999 Honda Civic?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0107 1999 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0107 1999 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0107 1999 Honda Civic code?
Need more information on how to fix the P0107 1999 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0107 1999 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0107 1999 Honda Civic Code
1. What are the common symptoms of OBDII code P0107 on a 1999 Honda Civic?
Symptoms may include poor engine performance, rough idling, stalling, decreased fuel efficiency, and the illumination of the Check Engine Light.
2. What does the OBDII code P0107 on a 1999 Honda Civic indicate?
The code P0107 indicates a low voltage condition in the Manifold Absolute Pressure (MAP) sensor circuit.
3. What are the possible causes of OBDII code P0107 on a 1999 Honda Civic?
Possible causes include a faulty MAP sensor, damaged or corroded wiring in the sensor circuit, a vacuum leak, or a problem with the engine's intake system.
4. How can I diagnose the issue causing OBDII code P0107 on my 1999 Honda Civic?
Diagnosis typically involves checking the MAP sensor for proper operation, inspecting the sensor wiring for damage, verifying vacuum levels, and ensuring the intake system is free of leaks.
5. Can I drive my 1999 Honda Civic with OBDII code P0107?
It is generally not recommended to drive with this code present, as it can lead to poor engine performance and potentially cause further damage if left unresolved.
6. How can I repair OBDII code P0107 on my 1999 Honda Civic?
Repair options may include replacing the MAP sensor, repairing or replacing damaged wiring, fixing any vacuum leaks, and ensuring proper functioning of the intake system.
7. Does OBDII code P0107 on a 1999 Honda Civic affect emissions?
Yes, a malfunctioning MAP sensor can affect emissions by causing the engine to run inefficiently, potentially leading to increased emissions.
8. Can a DIY enthusiast fix OBDII code P0107 on a 1999 Honda Civic?
Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair the issue causing the code. However, professional help is recommended if uncertain.
9. How much does it cost to repair OBDII code P0107 on a 1999 Honda Civic?
The cost of repairs can vary depending on the specific issue causing the code, the labor rates in your area, and whether you choose to DIY or seek professional assistance.
10. How can I prevent OBDII code P0107 from occurring on my 1999 Honda Civic in the future?
Regular maintenance, such as checking and replacing the MAP sensor as needed, inspecting wiring for damage, and addressing any vacuum leaks promptly, can help prevent this code from reoccurring.
Discuss the causes and fixes for P0107 1999 Honda Civic OBDII Code
Code P0107 1999 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
