AutoCodes – Chevrolet – P0106 2016 Chevrolet Silverado

P0106 2016 Chevrolet Silverado Code - Manifold Absolute Pressure Performance

Quick Answer

The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0106 2016 Chevrolet Silverado indicates Manifold Absolute Pressure Performance.
Common causes: Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,184

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 19, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0106 2016 Chevrolet Silverado Description

The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Pressure in the intake manifold is affected by engine speed, throttle opening, air temperature, Barometric Pressure (BARO) and if equipped, turbocharger output. A diaphragm within the MAP sensor is displaced by the pressure changes that occur from the varying load and operating conditions of the engine. The sensor translates this action into electrical resistance.
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM determines the MAP Sensor is stuck within the normal operating range. It accomplishes this by running 3 different models within the software to determine the values.

OBDII Code P0106 2016 Chevrolet Silverado - Manifold Absolute Pressure Performance - AutoCodes.com — P0106 2016 Chevrolet Silverado Code - Manifold Absolute Pressure Performance

What does this mean?

What are the Possible Causes of the DTC P0106 2016 Chevrolet Silverado?

Faulty Manifold Absolute Pressure (MAP) Sensor
Manifold Absolute Pressure Sensor harness is open or shorted
Manifold Absolute Pressure Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0106 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for the following Chevrolet models:
2004-2009 Chevrolet TrailBlazer
2004-2012 Chevrolet Colorado
Chevrolet TrailBlazer, Colorado Factory Service Bulletin OBDII Code P0106

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0106 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0106 2016 Chevrolet Silverado code?

Need more information on how to fix the P0106 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0106 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0106 2016 Chevrolet Silverado Code

1. What is OBDII code P0106 on a 2016 Chevrolet Silverado?

OBDII code P0106 for a 2016 Chevrolet Silverado indicates an issue with the Manifold Absolute Pressure (MAP) sensor circuit, specifically relating to performance problems.

2. What are the common symptoms of OBDII code P0106 on a 2016 Chevrolet Silverado?

Common symptoms of code P0106 in a 2016 Chevrolet Silverado may include poor engine performance, rough idling, stalling, decreased fuel efficiency, and in some cases, the Check Engine light may illuminate.

3. What are the possible causes of OBDII code P0106 on a 2016 Chevrolet Silverado?

Potential causes of code P0106 in a 2016 Chevrolet Silverado include a faulty MAP sensor, damaged or frayed wiring in the MAP sensor circuit, vacuum leaks, or issues with the intake manifold.

4. How can I diagnose OBDII code P0106 on my 2016 Chevrolet Silverado?

To diagnose code P0106 on a 2016 Chevrolet Silverado, start by visually inspecting the MAP sensor and its wiring for any signs of damage. Use a multimeter to test the sensor's voltage output and check for vacuum leaks in the intake system.

5. How can I repair OBDII code P0106 on a 2016 Chevrolet Silverado?

Repairing code P0106 on a 2016 Chevrolet Silverado may involve replacing the faulty MAP sensor, repairing or replacing damaged wiring, fixing any vacuum leaks, or cleaning the intake manifold if necessary.

6. Can I drive my 2016 Chevrolet Silverado with OBDII code P0106?

It is not recommended to drive your 2016 Chevrolet Silverado with OBDII code P0106, as it can lead to poor engine performance and potential further damage. It's best to address the issue promptly.

7. Will resetting the OBDII codes clear P0106 on a 2016 Chevrolet Silverado?

Resetting the OBDII codes may temporarily clear code P0106 on a 2016 Chevrolet Silverado, but it is essential to diagnose and repair the underlying issue causing the code to prevent it from reoccurring.

8. How much does it cost to fix OBDII code P0106 on a 2016 Chevrolet Silverado?

The cost to fix OBDII code P0106 on a 2016 Chevrolet Silverado can vary depending on the specific cause of the issue. Costs may range from replacing a faulty MAP sensor ($50-$200) to addressing more complex wiring or intake manifold issues.

9. Can a DIY enthusiast repair OBDII code P0106 on a 2016 Chevrolet Silverado?

Depending on their skill level and access to tools, a DIY enthusiast may be able to repair OBDII code P0106 on a 2016 Chevrolet Silverado by following online guides and tutorials. However, complex issues may require professional assistance.

10. How often does OBDII code P0106 occur in a 2016 Chevrolet Silverado?

The occurrence of OBDII code P0106 in a 2016 Chevrolet Silverado can vary based on factors such as vehicle usage, maintenance, and driving conditions. Regular maintenance and prompt attention to any warning lights can help prevent this code from appearing.