P0106 2012 Ford Fusion Code - Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance
Quick Answer
The Manifold Absolute Pressure (MAP) sensor measures the pressure inside the intake manifold. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0106 2012 Ford Fusion indicates Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0106 2012 Ford Fusion Description
The MAP sensor wiring includes 3 circuits. The Engine Control Module (ECM) supplies a regulated 5 volts to the sensor on a 5 V reference circuit. The ECM supplies ground on a low reference circuit. The MAP sensor provides a signal voltage to the ECM, relative to the pressure changes, on the MAP sensor signal circuit. The ECM converts the signal voltage input to a pressure value.
Under normal operation the greatest pressure that can exist in the intake manifold is at ignition ON, engine OFF, which is equal to the BARO. The lowest manifold pressure occurs when the vehicle is idling or decelerating. The ECM monitors the MAP sensor signal for pressure outside of the normal range.
The Diagnostic Trouble Code (DTC) will be set when the ECM determines the MAP Sensor is stuck within the normal operating range. It accomplishes this by running 3 different models within the software to determine the values.
What are the Possible Causes of the DTC P0106 2012 Ford Fusion?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0106 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0106 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0106 2012 Ford Fusion code?
Need more information on how to fix the P0106 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0106 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0106 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P0106 in a 2012 Ford Fusion?
- Common symptoms include rough idling, stalling, poor acceleration, decreased fuel efficiency, and illuminated Check Engine Light.
2. What does the OBDII code P0106 for a 2012 Ford Fusion indicate?
- The code P0106 indicates an issue with the Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance.
3. What are the possible causes of OBDII code P0106 in a 2012 Ford Fusion?
- Possible causes include a faulty MAP sensor, damaged wiring or connectors, intake leaks, clogged air filter, or issues with the engine's computer.
4. How can I diagnose the OBDII code P0106 in my 2012 Ford Fusion?
- Diagnosis involves checking the MAP sensor's voltage and resistance, inspecting the sensor's wiring for damage, and ensuring there are no vacuum leaks in the intake system.
5. Can a dirty air filter trigger the OBDII code P0106 in a 2012 Ford Fusion?
- Yes, a clogged or dirty air filter can disrupt the airflow and lead to incorrect pressure readings, triggering the P0106 code.
6. How can I repair OBDII code P0106 on my 2012 Ford Fusion?
- Repair options include replacing the faulty MAP sensor, repairing damaged wiring, fixing any vacuum leaks, and ensuring proper installation of the sensor.
7. Is it safe to drive my 2012 Ford Fusion with OBDII code P0106?
- It is not recommended to drive with the P0106 code as it can cause performance issues and potentially lead to more severe engine problems if left unresolved.
8. Can resetting the Check Engine Light resolve the OBDII code P0106 in a 2012 Ford Fusion?
- Resetting the light may temporarily turn it off, but it will not fix the underlying issue causing the P0106 code to reoccur.
9. How much does it cost to repair OBDII code P0106 in a 2012 Ford Fusion?
- The cost of repair can vary depending on the exact cause of the issue, but replacing a MAP sensor typically ranges from $100 to $300 including parts and labor.
10. Are there any recalls or technical service bulletins related to OBDII code P0106 in a 2012 Ford Fusion?
- It's advisable to check with Ford dealerships or online resources for any recalls or technical service bulletins related to the P0106 code in the 2012 Ford Fusion.
Discuss the causes and fixes for P0106 2012 Ford Fusion OBDII Code
Code P0106 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
