AutoCodes - Ford - P0106 2008 FORD FUSION

P0106 2008 FORD FUSION Code - Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P0106 2008 FORD FUSION code possible causes

  • Faulty Manifold Absolute Pressure sensor
  • Manifold Absolute Pressure harness is open or shorted
  • Manifold Absolute Pressure sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

|How do I fix the P0106 2008 FORD FUSION code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0106 2008 FORD FUSION code tech notes

You can try to clean the MAP (Manifold Absolute Pressure) sensor with mass air flow sensor cleaner.

|Cost of diagnosing the P0106 2008 FORD FUSION code

Labor: 1.0

The cost of diagnosing the P0106 2008 FORD FUSION code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0106 2008 FORD FUSION code detected?

An excessively low or high voltage from the sensor is sent to ECM

|What are P0106 2008 FORD FUSION code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine rough idle
  • Engine hesitation

|P0106 2008 FORD FUSION code description

The Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine's Engine Control Module (ECM). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow. In some vehicles the absolute pressure sensor is built into ECM.
OBDII Code P0106 2008 Ford Fusion - Manifold Absolute Pressure/Barometric Pressure Sensor Range/Performance - AutoCodes.com

|Need more information with the P0106 2008 FORD FUSION code?

Need more information on how to fix the P0106 2008 FORD FUSION code? Get Access to Factory Service Manuals

|Need help with a P0106 2008 FORD FUSION code?

Get the P0106 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

|P0106 2008 FORD FUSION code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0106 2008 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?