AutoCodes
 
OBDII Code List
 
P0105 PONTIAC

P0105 PONTIAC - Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3   
Comments  |  Add Comment

Possible causes

  • Faulty Manifold Absolute Pressure sensor
  • Manifold Absolute Pressure harness is open or shorted
  • Manifold Absolute Pressure sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)
  • When is the code detected?

    An excessively low or high voltage from the sensor is sent to ECM.

    Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine rough idle
  • Engine hesitation
  • P0105 Pontiac Description

    The Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine's Engine Control Module (ECM). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow. In some vehicles the absolute pressure sensor is built into ECM.
    OBDII Code P0105 Pontiac - Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction - AutoCodes.com

    Need more help?

    Get the P0105 Pontiac code diagnosed by a professional: Find a repair shop in you area

    Related Information

    P0105 PONTIAC Comments

    Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0105 Pontiac code? Have you replaced any parts?
    Any information is appreciated. Thanks
    Top ⇧