AutoCodes – Land Rover – P0103 Land Rover

P0103 Land Rover Code - Mass or Volume Air Flow Circuit High Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0103 Land Rover indicates Mass or Volume Air Flow Circuit High Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,135

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 19, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0103 Land Rover Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is more than the factory specifications.

OBDII Code P0103 Land Rover - Mass or Volume Air Flow Circuit High Input - AutoCodes.com — P0103 Land Rover Code - Mass or Volume Air Flow Circuit High Input

What does this mean?

What are the Possible Causes of the DTC P0103 Land Rover?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0103 Land Rover?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0103 Land Rover code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0103 Land Rover code?

Need more information on how to fix the P0103 Land Rover code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0103 Land Rover code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0103 Land Rover Code

1. What are common symptoms of OBDII code P0103 on a Land Rover?

- Common symptoms include poor engine performance, hesitation during acceleration, stalling, rough idling, and potentially increased fuel consumption.

2. What does the OBDII code P0103 indicating a Mass or Volume Air Flow Circuit High Input mean?

- The code indicates that the engine control module (ECM) has detected a higher than normal voltage signal from the mass air flow (MAF) sensor.

3. What are the potential causes of OBDII code P0103 on a Land Rover?

- Causes can include a faulty MAF sensor, a dirty or contaminated MAF sensor, a vacuum leak, a clogged air filter, or issues with the wiring or connectors related to the MAF sensor.

4. How can I diagnose the cause of OBDII code P0103 on my Land Rover?

- Diagnose the issue by visually inspecting the MAF sensor and its connections, checking for vacuum leaks, testing the MAF sensor's voltage output, and using a scan tool to monitor sensor data.

5. Can I drive my Land Rover with an OBDII code P0103 present?

- It is not recommended to drive your vehicle with this code present, as it can lead to poor engine performance and potentially cause further damage if left unresolved.

6. How can I repair OBDII code P0103 on my Land Rover?

- Repair options include cleaning or replacing the MAF sensor, fixing any vacuum leaks, replacing the air filter, and ensuring proper wiring connections.

7. Will resetting the OBDII code P0103 clear the issue on my Land Rover?

- Resetting the code may temporarily clear the check engine light, but if the underlying issue is not addressed, the code is likely to return.

8. Is it necessary to replace the MAF sensor when dealing with OBDII code P0103?

- Not always. Sometimes cleaning the MAF sensor or fixing related issues like vacuum leaks can resolve the problem without the need for a replacement.

9. Can a clogged air filter cause OBDII code P0103 on a Land Rover?

- Yes, a clogged air filter can disrupt the airflow to the MAF sensor, leading to incorrect readings and triggering the P0103 code.

10. How sensitive is the MAF sensor to contaminants in triggering OBDII code P0103?

- The MAF sensor is quite sensitive to contaminants like dirt, oil, or debris, which can impact its performance and lead to the high input signal triggering the P0103 code.