AutoCodes – Ford – P0103 2009 Ford Fusion

P0103 2009 Ford Fusion Code - Mass or Volume Air Flow Circuit High Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0103 2009 Ford Fusion indicates Mass or Volume Air Flow Circuit High Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,345

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0103 2009 Ford Fusion Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is more than the factory specifications.

OBDII Code P0103 2009 Ford Fusion - Mass or Volume Air Flow Circuit High Input - AutoCodes.com — P0103 2009 Ford Fusion Code - Mass or Volume Air Flow Circuit High Input

What does this mean?

What are the Possible Causes of the DTC P0103 2009 Ford Fusion?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0103 2009 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0103 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0103 2009 Ford Fusion code?

Need more information on how to fix the P0103 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0103 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0103 2009 Ford Fusion Code

1. What are the common symptoms of OBDII code P0103 in a 2009 Ford Fusion?

- Common symptoms include rough idling, reduced engine performance, stalling, and decreased fuel efficiency.

2. What does the OBDII code P0103 in a 2009 Ford Fusion indicate?

- The code P0103 indicates a high input in the mass or volume air flow circuit, signaling a potential issue with the air flow sensor.

3. What are the possible causes of OBDII code P0103 in a 2009 Ford Fusion?

- Possible causes include a faulty mass air flow sensor, damaged air filter, vacuum leaks, wiring issues, or a problem with the intake air temperature sensor.

4. How can I diagnose the OBDII code P0103 in my 2009 Ford Fusion?

- You can diagnose the code by inspecting the air intake system for any visible damage or leaks, testing the mass air flow sensor, and checking the wiring connections for any issues.

5. Can I drive my 2009 Ford Fusion with the OBDII code P0103?

- It is not recommended to drive with the code P0103 as it can lead to engine performance issues and potential damage if left unresolved.

6. How can I repair OBDII code P0103 in my 2009 Ford Fusion?

- Repair options include replacing the mass air flow sensor, repairing any damaged wiring, replacing the air filter, and addressing any vacuum leaks in the system.

7. Will resetting the OBDII code P0103 in a 2009 Ford Fusion make it go away permanently?

- Resetting the code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to reappear.

8. Can a dirty air filter trigger the OBDII code P0103 in a 2009 Ford Fusion?

- Yes, a dirty or clogged air filter can disrupt the air flow sensor readings and potentially trigger the code P0103.

9. How much does it cost to repair OBDII code P0103 in a 2009 Ford Fusion?

- The cost of repair can vary depending on the specific issue, but it may range from $100 to $300 for parts and labor.

10. Is it possible to prevent OBDII code P0103 in a 2009 Ford Fusion?

- Regular maintenance, such as replacing air filters as recommended and inspecting the air intake system, can help prevent issues leading to the code P0103.