AutoCodes – Nissan – P0103 2005 Nissan Maxima

P0103 2005 Nissan Maxima Code - Mass Air Flow Sensor Circuit High Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0103 2005 Nissan Maxima indicates Mass Air Flow Sensor Circuit High Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,278

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0103 2005 Nissan Maxima Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is more than the factory specifications.

OBDII Code P0103 2005 Nissan Maxima - Mass Air Flow Sensor Circuit High Input - AutoCodes.com — P0103 2005 Nissan Maxima Code - Mass Air Flow Sensor Circuit High Input

What does this mean?

What are the Possible Causes of the DTC P0103 2005 Nissan Maxima?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0103 2005 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0103 2005 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0103 2005 Nissan Maxima code?

Need more information on how to fix the P0103 2005 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0103 2005 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0103 2005 Nissan Maxima Code

1. What are the common symptoms of OBDII code P0103 in a 2005 Nissan Maxima?

- Common symptoms include the Check Engine light illuminating, reduced engine performance, rough idling, and potential stalling.

2. What does the OBDII code P0103 on a 2005 Nissan Maxima indicate?

- The code indicates an issue with the Mass Air Flow (MAF) sensor circuit, specifically a high input signal being detected.

3. What are the possible causes of OBDII code P0103 in a 2005 Nissan Maxima?

- Possible causes include a faulty MAF sensor, damaged wiring or connectors in the MAF circuit, a dirty or contaminated MAF sensor, or a vacuum leak.

4. How can I diagnose the cause of OBDII code P0103 in my 2005 Nissan Maxima?

- You can diagnose the issue by visually inspecting the MAF sensor and its connections, checking for any signs of damage or contamination. You may also use a multimeter to test the sensor's voltage and resistance.

5. Can a dirty air filter cause OBDII code P0103 to trigger on a 2005 Nissan Maxima?

- Yes, a dirty air filter can restrict airflow and cause the MAF sensor to read incorrectly, potentially leading to a high input signal and triggering the P0103 code.

6. How can I repair OBDII code P0103 in my 2005 Nissan Maxima?

- Repair options include cleaning or replacing the MAF sensor, repairing any damaged wiring or connectors, addressing any vacuum leaks, and ensuring the air filter is clean.

7. Is it safe to continue driving my 2005 Nissan Maxima with OBDII code P0103 present?

- It is not recommended to drive with the P0103 code present, as it can lead to reduced engine performance and potential stalling, impacting the safety and reliability of the vehicle.

8. Will resetting the Check Engine light resolve OBDII code P0103 in a 2005 Nissan Maxima?

- Simply resetting the Check Engine light will not resolve the underlying issue causing the P0103 code. It is important to diagnose and address the root cause of the problem.

9. How much does it typically cost to repair OBDII code P0103 in a 2005 Nissan Maxima?

- The cost of repairing P0103 can vary depending on the cause of the issue. It may range from a simple fix like cleaning the MAF sensor to a more involved repair like replacing the sensor or addressing wiring issues.

10. Can a DIY enthusiast fix OBDII code P0103 in a 2005 Nissan Maxima?

- Depending on the cause of the P0103 code, some DIY enthusiasts may be able to address the issue by cleaning the MAF sensor or checking for loose connections. However, more complex repairs may require professional assistance.