AutoCodes – Chevrolet – P0102 2015 Chevrolet Silverado

P0102 2015 Chevrolet Silverado Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The Mass Air Flow (MAF) sensor is integrated with the multifunction intake air sensor. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2015 Chevrolet Silverado indicates Mass or Volume Air Flow Circuit Low Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 846

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2015 Chevrolet Silverado Description

The Mass Air Flow (MAF) sensor is integrated with the multifunction intake air sensor. The MAF sensor is an air flow meter that measures the amount of air in the sensor bore. The Engine Control Module (ECM) uses the MAF sensor signal to provide the correct fuel delivery for all engine speeds and loads. A small quantity of air entering the engine indicates a deceleration or idle condition. A large quantity of air entering the engine indicates an acceleration or high load condition.
The ECM applies 5 V to the MAF sensor on the MAF sensor signal circuit. The sensor uses voltage to produce a variable frequency signal based on the inlet air flow through the sensor bore. The signal varies with engine load and is displayed by the scan tool as Hertz (Hz) and grams per second (g/s). Ignition voltage and ground circuits are also supplied to the multifunction intake air sensor internal circuits for the Intake Air Temperature (IAT) sensor 2, Humidity sensor, and MAF sensor.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is less than 850 Hz (about 1.43 g/s) for greater than 10 s.

OBDII Code P0102 2015 Chevrolet Silverado - Mass or Volume Air Flow Circuit Low Input - AutoCodes.com — P0102 2015 Chevrolet Silverado Code - Mass or Volume Air Flow Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0102 2015 Chevrolet Silverado?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0102 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2015 Chevrolet Silverado code?

Need more information on how to fix the P0102 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2015 Chevrolet Silverado Code

What does the OBDII code P0102 mean for a 2015 Chevrolet Silverado?

P0102 indicates that the Mass Air Flow (MAF) sensor is detecting a low input signal, which may affect engine performance.

What are the common symptoms of code P0102 in a 2015 Chevrolet Silverado?

Symptoms may include poor acceleration, rough idle, reduced fuel efficiency, and the check engine light turning on.

What causes the P0102 code to appear in a 2015 Chevrolet Silverado?

Common causes include a dirty or faulty MAF sensor, damaged wiring or connections, air intake leaks, or a clogged air filter.

How can a dirty MAF sensor lead to code P0102?

A dirty MAF sensor can produce inaccurate readings, resulting in a low input signal being sent to the engine control module (ECM).

Can a clogged air filter trigger the P0102 code?

Yes, a clogged air filter can restrict airflow to the MAF sensor, causing it to register a low input signal.

How do I diagnose the P0102 code on my 2015 Chevrolet Silverado?

Start by inspecting the MAF sensor, wiring, air filter, and intake system for damage, dirt, or debris. You may also need a diagnostic scanner to check live sensor data.

Can I drive my 2015 Chevrolet Silverado with the P0102 code?

While the truck may still run, driving with this code can lead to reduced performance and fuel efficiency, and it should be addressed promptly.

How do I fix the P0102 code on a 2015 Chevrolet Silverado?

You can clean or replace the MAF sensor, repair damaged wiring, replace the air filter, or check for and fix air intake leaks.

Will disconnecting the battery clear the P0102 code?

Disconnecting the battery may temporarily clear the code, but if the underlying issue isn't resolved, the code will likely return.

Does the P0102 code require professional repair?

If cleaning the MAF sensor or replacing the air filter doesnâ€™t fix the issue, professional diagnostics may be needed to identify wiring problems or deeper engine issues.