AutoCodes – Nissan – P0102 2008 Nissan Versa

P0102 2008 Nissan Versa Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2008 Nissan Versa indicates Mass or Volume Air Flow Circuit Low Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,583

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2008 Nissan Versa Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is less than the factory specifications.

OBDII Code P0102 2008 Nissan Versa - Mass or Volume Air Flow Circuit Low Input - AutoCodes.com — P0102 2008 Nissan Versa Code - Mass or Volume Air Flow Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0102 2008 Nissan Versa?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow (MAF) Sensor
Mass Air Flow (MAF) Sensor harness is open or shorted
Mass Air Flow (MAF) Sensor circuit poor electrical connection

How to Fix the DTC P0102 2008 Nissan Versa?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2008 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2008 Nissan Versa code?

Need more information on how to fix the P0102 2008 Nissan Versa code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2008 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2008 Nissan Versa Code

1. What are the common symptoms of OBDII code P0102 on a 2008 Nissan Versa?

- Common symptoms include poor acceleration, rough idling, stalling, and decreased fuel efficiency.

2. What does the OBDII code P0102 "Mass or Volume Air Flow Circuit Low Input" indicate on a 2008 Nissan Versa?

- This code signifies that the Mass Air Flow (MAF) sensor is detecting a lower than normal voltage input.

3. What are the possible causes of OBDII code P0102 on a 2008 Nissan Versa?

- Potential causes include a dirty or faulty MAF sensor, vacuum leaks, clogged air filter, wiring issues, or a malfunctioning PCM.

4. How can I diagnose the OBDII code P0102 on my 2008 Nissan Versa?

- You can diagnose the code by inspecting the MAF sensor for dirt or debris, checking for vacuum leaks, testing the sensor's voltage, and examining the related wiring.

5. Can I drive my 2008 Nissan Versa with the OBDII code P0102?

- It is not recommended to drive your vehicle with code P0102, as it can lead to poor engine performance and potential damage if left unresolved.

6. How can I repair OBDII code P0102 on a 2008 Nissan Versa?

- To repair this code, you may need to clean or replace the MAF sensor, fix any vacuum leaks, replace the air filter, repair damaged wiring, or reset the PCM.

7. Is it possible to reset the OBDII code P0102 on a 2008 Nissan Versa without fixing the underlying issue?

- While you can clear the code with an OBDII scanner, it is not recommended as the issue will likely return if the root cause is not addressed.

8. How much does it typically cost to fix OBDII code P0102 on a 2008 Nissan Versa?

- The cost of fixing code P0102 can vary depending on the cause, but it may range from $100-$500, including parts and labor.

9. Can a DIY enthusiast repair OBDII code P0102 on a 2008 Nissan Versa?

- Yes, some components related to this code can be DIY repaired, such as cleaning the MAF sensor or replacing the air filter. However, more complex issues may require professional help.

10. How often does OBDII code P0102 occur in 2008 Nissan Versas?

- OBDII code P0102 can occur occasionally in 2008 Nissan Versas, especially as the vehicle ages and components wear out. Regular maintenance can help prevent this code from appearing.