AutoCodes – Nissan – P0102 2007 Nissan Maxima

P0102 2007 Nissan Maxima Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2007 Nissan Maxima indicates Mass or Volume Air Flow Circuit Low Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,357

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2007 Nissan Maxima Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is less than the factory specifications.

OBDII Code P0102 2007 Nissan Maxima - Mass or Volume Air Flow Circuit Low Input - AutoCodes.com — P0102 2007 Nissan Maxima Code - Mass or Volume Air Flow Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0102 2007 Nissan Maxima?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow (MAF) Sensor
Mass Air Flow (MAF) Sensor harness is open or shorted
Mass Air Flow (MAF) Sensor circuit poor electrical connection

How to Fix the DTC P0102 2007 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2007 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2007 Nissan Maxima code?

Need more information on how to fix the P0102 2007 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2007 Nissan Maxima Code

1. What are common symptoms of OBDII code P0102 on a 2007 Nissan Maxima?

- Common symptoms include poor acceleration, rough idling, stalling, decreased fuel efficiency, and the illumination of the check engine light.

2. What does the OBDII code P0102 for a 2007 Nissan Maxima indicate?

- This code indicates a low input in the Mass or Volume Air Flow (MAF/VAF) circuit, suggesting an issue with the MAF sensor's performance.

3. What are possible causes of the P0102 code on a 2007 Nissan Maxima?

- Possible causes include a faulty MAF sensor, a dirty or contaminated air filter, vacuum leaks, wiring issues, or a clogged air intake system.

4. How can I diagnose the cause of the P0102 code on my 2007 Nissan Maxima?

- You can start by inspecting the MAF sensor and its wiring for any visible damage or contamination. Check the air filter and intake system for any blockages or leaks. Consider using a diagnostic scan tool to monitor the MAF sensor's readings.

5. Can a dirty air filter trigger the P0102 code on a 2007 Nissan Maxima?

- Yes, a dirty or clogged air filter can disrupt the airflow entering the engine, leading to inaccurate MAF sensor readings and triggering the P0102 code.

6. How can I repair the P0102 code on my 2007 Nissan Maxima caused by a faulty MAF sensor?

- To repair a faulty MAF sensor, you will typically need to replace the sensor with a new one that is compatible with your Nissan Maxima model.

7. Are there any DIY tips for fixing the P0102 code on a 2007 Nissan Maxima?

- DIY tips include cleaning or replacing the air filter, inspecting and cleaning the MAF sensor, checking for any loose or damaged wiring, and ensuring the air intake system is free of obstructions.

8. Can a vacuum leak trigger the P0102 code on a 2007 Nissan Maxima?

- Yes, a vacuum leak can disrupt the airflow and cause incorrect MAF sensor readings, potentially leading to the triggering of the P0102 code.

9. Is it safe to continue driving with the P0102 code illuminated on a 2007 Nissan Maxima?

- It is not recommended to continue driving with the P0102 code illuminated, as it can affect the performance and fuel efficiency of your vehicle. It's best to diagnose and address the issue promptly.

10. How much does it typically cost to repair the P0102 code on a 2007 Nissan Maxima?

- The cost of repairing the P0102 code can vary depending on the root cause, but it may range from $100 for simple fixes like cleaning the MAF sensor to $300-$500 for replacing the sensor or addressing more complex issues like wiring problems.