AutoCodes – Nissan – P0102 2006 Nissan Sentra

P0102 2006 Nissan Sentra Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2006 Nissan Sentra indicates Mass or Volume Air Flow Circuit Low Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,537

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2006 Nissan Sentra Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is less than the factory specifications.

OBDII Code P0102 2006 Nissan Sentra - Mass or Volume Air Flow Circuit Low Input - AutoCodes.com — P0102 2006 Nissan Sentra Code - Mass or Volume Air Flow Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0102 2006 Nissan Sentra?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow (MAF) Sensor
Mass Air Flow (MAF) Sensor harness is open or shorted
Mass Air Flow (MAF) Sensor circuit poor electrical connection

How to Fix the DTC P0102 2006 Nissan Sentra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2006 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2006 Nissan Sentra code?

Need more information on how to fix the P0102 2006 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2006 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2006 Nissan Sentra Code

1. What are the common symptoms of OBDII code P0102 in a 2006 Nissan Sentra?

- Common symptoms include poor acceleration, rough idling, stalling, decreased fuel efficiency, and possibly a check engine light.

2. What does the OBDII code P0102 "Mass or Volume Air Flow Circuit Low Input" indicate in a 2006 Nissan Sentra?

- This code indicates that the engine control module (ECM) has detected a lower than expected voltage coming from the Mass Air Flow (MAF) sensor.

3. What are the possible causes of OBDII code P0102 in a 2006 Nissan Sentra?

- Possible causes include a faulty MAF sensor, a dirty or contaminated MAF sensor, a vacuum leak, a clogged air filter, or issues with the wiring or connectors related to the MAF sensor.

4. How can I diagnose the cause of OBDII code P0102 in my 2006 Nissan Sentra?

- You can start by inspecting the MAF sensor and its wiring for any visible damage or contamination. You can also perform a voltage test on the MAF sensor to determine if it is functioning properly.

5. Can a dirty air filter trigger OBDII code P0102 in a 2006 Nissan Sentra?

- Yes, a dirty or clogged air filter can disrupt the airflow entering the engine, causing the MAF sensor to detect lower-than-expected readings and trigger the P0102 code.

6. How can I repair OBDII code P0102 in my 2006 Nissan Sentra?

- Depending on the underlying cause, you may need to clean or replace the MAF sensor, clean or replace the air filter, fix any vacuum leaks, or repair any damaged wiring or connectors.

7. Is it safe to continue driving with OBDII code P0102 illuminated in a 2006 Nissan Sentra?

- It is generally not recommended to continue driving with this code illuminated, as it can lead to poor engine performance and potentially cause further damage if left unresolved.

8. Can a malfunctioning MAF sensor cause other issues besides triggering OBDII code P0102 in a 2006 Nissan Sentra?

- Yes, a malfunctioning MAF sensor can also cause issues such as erratic idling, engine hesitation, and incorrect air-fuel mixture, leading to overall poor engine performance.

9. How much does it typically cost to repair OBDII code P0102 in a 2006 Nissan Sentra?

- The cost of repair can vary depending on the specific cause of the issue, but it may range from a simple cleaning of the MAF sensor to a replacement, which can cost between $100 to $300 or more.

10. Can I reset OBDII code P0102 in my 2006 Nissan Sentra without fixing the underlying issue?

- While you can clear the code with an OBDII scanner, it is not recommended to do so without addressing the root cause, as the issue may persist and trigger the code again, potentially causing further damage.