AutoCodes – Nissan – P0102 2005 Nissan Maxima

P0102 2005 Nissan Maxima Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2005 Nissan Maxima indicates Mass or Volume Air Flow Circuit Low Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,148

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2005 Nissan Maxima Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is less than the factory specifications.

OBDII Code P0102 2005 Nissan Maxima - Mass or Volume Air Flow Circuit Low Input - AutoCodes.com — P0102 2005 Nissan Maxima Code - Mass or Volume Air Flow Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0102 2005 Nissan Maxima?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0102 2005 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2005 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2005 Nissan Maxima code?

Need more information on how to fix the P0102 2005 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2005 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2005 Nissan Maxima Code

1. What are the common symptoms of OBDII code P0102 in a 2005 Nissan Maxima?

- Common symptoms include poor fuel economy, rough idling, stalling, hesitation during acceleration, and a check engine light illuminated on the dashboard.

2. What does the OBDII code P0102 on a 2005 Nissan Maxima indicate?

- The code P0102 indicates a low input in the mass or volume air flow circuit, suggesting a potential issue with the air flow sensor or its circuit.

3. What are the possible causes of OBDII code P0102 in a 2005 Nissan Maxima?

- Possible causes include a dirty or faulty mass air flow sensor, a vacuum leak, a clogged air filter, a damaged air intake system, or a problem with the sensor's wiring or connector.

4. How can I diagnose the issue causing OBDII code P0102 in my 2005 Nissan Maxima?

- You can start by inspecting the air filter and intake system for any obstructions or damage. Then, check the mass air flow sensor for dirt or debris. Finally, inspect the sensor's wiring and connector for any signs of wear or corrosion.

5. Can I drive my 2005 Nissan Maxima with OBDII code P0102?

- It is not recommended to drive your vehicle with code P0102, as it can lead to poor engine performance and potential damage over time. It's best to address the issue promptly.

6. How can I repair OBDII code P0102 in my 2005 Nissan Maxima?

- Depending on the cause, you may need to clean or replace the mass air flow sensor, replace the air filter, fix any vacuum leaks, or repair damaged wiring or connectors. It's advisable to consult a mechanic for a proper diagnosis and repair.

7. Will resetting the check engine light resolve OBDII code P0102 in a 2005 Nissan Maxima?

- Resetting the check engine light may temporarily turn it off, but it will not fix the underlying issue causing code P0102. It's important to address the root cause of the problem to prevent further issues.

8. How much does it cost to fix OBDII code P0102 in a 2005 Nissan Maxima?

- The cost of fixing code P0102 can vary depending on the cause of the issue. Repairs may range from a simple cleaning of the sensor to a replacement of parts, which can cost anywhere from $50 to $500 or more.

9. Can a DIY enthusiast fix OBDII code P0102 in a 2005 Nissan Maxima?

- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address the issue causing code P0102. However, if you are unsure or inexperienced, it's best to seek professional help to avoid further complications.

10. How often does OBDII code P0102 occur in 2005 Nissan Maxima vehicles?

- Code P0102 can occur in 2005 Nissan Maxima vehicles due to various factors, such as sensor wear, dirty filters, or wiring issues. Regular maintenance and prompt attention to engine issues can help prevent the occurrence of this code.