AutoCodes – Nissan – P0102 2004 Nissan Sentra

P0102 2004 Nissan Sentra Code - Mass or Volume Air Flow Circuit Low Input

Quick Answer

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0102 2004 Nissan Sentra indicates Mass or Volume Air Flow Circuit Low Input.
Common causes: Common causes include Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor, Intake air leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,257

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0102 2004 Nissan Sentra Description

The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM). The ECM controls the temperature of the hot film by a certain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the MAF Sensor Signal is less than the factory specifications.

OBDII Code P0102 2004 Nissan Sentra - Mass or Volume Air Flow Circuit Low Input - AutoCodes.com — P0102 2004 Nissan Sentra Code - Mass or Volume Air Flow Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0102 2004 Nissan Sentra?

Dirty Air Filter
Dirty Mass Air Flow (MAF) Sensor
Intake air leaks
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P0102 2004 Nissan Sentra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low compress air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0102 2004 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0102 2004 Nissan Sentra code?

Need more information on how to fix the P0102 2004 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0102 2004 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0102 2004 Nissan Sentra Code

1. What are the common symptoms of OBDII code P0102 on a 2004 Nissan Sentra?

- Common symptoms include stalling or hesitation during acceleration, decreased fuel efficiency, rough idle, and illuminated Check Engine Light.

2. What does the OBDII code P0102 for a 2004 Nissan Sentra indicate?

- The code P0102 indicates a low input signal from the Mass Air Flow (MAF) sensor circuit.

3. What are the possible causes of OBDII code P0102 on a 2004 Nissan Sentra?

- Potential causes include a faulty MAF sensor, damaged or dirty MAF sensor, vacuum leaks, wiring issues, or a clogged air filter.

4. How can I diagnose the OBDII code P0102 on my 2004 Nissan Sentra?

- You can diagnose the code by visually inspecting the MAF sensor, checking for damaged wires, testing the MAF sensor's voltage output, and scanning for other related trouble codes.

5. Can a dirty air filter trigger the OBDII code P0102 on a 2004 Nissan Sentra?

- Yes, a dirty air filter can restrict airflow to the MAF sensor, leading to incorrect readings and triggering the P0102 code.

6. Is it safe to continue driving my 2004 Nissan Sentra with the OBDII code P0102?

- It is not recommended to drive the vehicle with the P0102 code present, as it can affect engine performance and fuel efficiency.

7. How do I reset the OBDII code P0102 on my 2004 Nissan Sentra?

- You can reset the code by using an OBDII scanner to clear the trouble code after addressing the underlying issue causing the P0102 code.

8. Can I clean the MAF sensor to resolve the OBDII code P0102 on my 2004 Nissan Sentra?

- Yes, cleaning the MAF sensor with specialized MAF sensor cleaner can sometimes resolve the low input issue and clear the P0102 code.

9. Do I need to replace the MAF sensor if I get the OBDII code P0102 on my 2004 Nissan Sentra?

- If cleaning the MAF sensor does not resolve the issue, it may be necessary to replace the sensor to fix the low input signal problem triggering the P0102 code.

10. How much does it typically cost to repair the OBDII code P0102 on a 2004 Nissan Sentra?

- The cost of repairing the P0102 code can vary depending on the cause, but it may range from $100 to $300 for DIY repairs and $200 to $500 at a repair shop.