AutoCodes – Ford – P0101 2018 Ford F150

P0101 2018 Ford F150 Code - Mass Air Flow Sensor 'A' Circuit Range/Performance

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Intake air leaks, Faulty Mass Airflow (MAF) 'A' Sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0101 2018 Ford F150 indicates Mass Air Flow Sensor 'A' Circuit Range/Performance.
Common causes: Common causes include Dirty Air Filter, Intake air leaks, Faulty Mass Airflow (MAF) 'A' Sensor.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 206

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0101 2018 Ford F150 Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) will be set when the actual airflow is less or greater than the modeled airflow by greater than a calibrated value for 2.4 seconds.

OBDII Code P0101 2018 Ford F150 - Mass Air Flow Sensor 'A' Circuit Range/Performance - AutoCodes.com — P0101 2018 Ford F150 Code - Mass Air Flow Sensor 'A' Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0101 2018 Ford F150?

Dirty Air Filter
Intake air leaks
Faulty Mass Airflow (MAF) 'A' Sensor
Mass Airflow 'A' Sensor harness is open or shorted
Mass Airflow 'A' Sensor circuit poor electrical connection

How to Fix the DTC P0101 2018 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low-compressed air or a Mass Air Flow Sensor Cleaner. Reset the code and drive the vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0101 2018 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0101 2018 Ford F150 code?

Need more information on how to fix the P0101 2018 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0101 2018 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0101 2018 Ford F150 Code

1. What does the OBDII code P0101 mean for a 2018 Ford F150?

The code P0101 indicates an issue with the Mass Air Flow (MAF) Sensor 'A' Circuit Range/Performance on the 2018 Ford F150.

2. What are common symptoms of a P0101 code in a 2018 Ford F150?

Common symptoms include a decrease in fuel efficiency, rough idling, engine hesitation, and possible stalling.

3. What are the potential causes of a P0101 code on a 2018 Ford F150?

Possible causes include a dirty or faulty MAF sensor, a vacuum leak in the intake system, a clogged air filter, or issues with the electrical wiring or connectors.

4. How can I diagnose a P0101 code on my 2018 Ford F150?

To diagnose a P0101 code, you can start by inspecting the MAF sensor for dirt or damage, checking for any vacuum leaks, examining the air filter, and ensuring all electrical connections are secure.

5. Can I drive my 2018 Ford F150 with a P0101 code?

It is not recommended to drive your vehicle with a P0101 code as it can lead to poor engine performance and potential damage if left unresolved.

6. How can I repair a P0101 code on a 2018 Ford F150?

Repair options may include cleaning or replacing the MAF sensor, fixing any vacuum leaks, replacing the air filter, and checking and repairing any faulty wiring or connectors.

7. Is it possible to reset the P0101 code on a 2018 Ford F150?

You can reset the code using an OBDII scanner, but it is important to address the underlying issue causing the code to prevent it from reoccurring.

8. How much does it cost to fix a P0101 code on a 2018 Ford F150?

The cost of fixing a P0101 code can vary depending on the specific issue, but it may range from a simple DIY cleaning of the MAF sensor to more extensive repairs involving part replacements.

9. Will a P0101 code affect my 2018 Ford F150's emissions or inspection?

Yes, a P0101 code can impact your vehicle's emissions and may cause it to fail an emissions inspection, so it's important to address the issue promptly.

10. Can a P0101 code on a 2018 Ford F150 cause long-term damage if ignored?

Ignoring a P0101 code can potentially lead to decreased fuel efficiency, engine performance issues, and in some cases, long-term damage to the engine or emissions system, so it's best to address it promptly.