P00FF 2016 GMC Sierra Code - Body Control Module Requested MIL Illumination
Quick Answer
Control modules constantly monitor the vehicle for any condition which may adversely affect vehicle performance. Common causes include Check Body Control Module for codes, Faulty Body Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P00FF 2016 GMC Sierra indicates Body Control Module Requested MIL Illumination.
- Common causes
- Common causes include Check Body Control Module for codes, Faulty Body Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P00FF 2016 GMC Sierra Description
The DTC will be set when the ECM receives a serial data message from the Body Control Module indicating that DTC has been set in the module.
What are the Possible Causes of the DTC P00FF 2016 GMC Sierra?
- Check Body Control Module for codes
- Faulty Body Control Module
How to Fix the DTC P00FF 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P00FF 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P00FF 2016 GMC Sierra code?
Need more information on how to fix the P00FF 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P00FF 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P00FF 2016 GMC Sierra Code
1. What does the OBD-II code P00FF mean on a 2016 GMC Sierra?
P00FF indicates that the Body Control Module (BCM) has requested the Malfunction Indicator Lamp (MIL) to illuminate, typically due to an underlying issue detected by the BCM.
2. What are the common symptoms of P00FF on a 2016 GMC Sierra?
The most common symptoms include the check engine light turning on, possible warning messages on the dashboard, and erratic behaviors in electrical components such as lights, locks, or wipers.
3. What causes the P00FF code to appear on a 2016 GMC Sierra?
This code is often triggered by faults in the Body Control Module itself, communication issues between the BCM and other modules, or wiring/connectivity problems.
4. Can a faulty Body Control Module cause the P00FF code?
Yes, a malfunctioning BCM can send incorrect requests to illuminate the MIL, leading to the P00FF code being stored.
5. How can I diagnose the P00FF code on my 2016 GMC Sierra?
Start by using a scan tool to check for additional codes stored in the BCM or other modules. Next, inspect the wiring and connectors related to the BCM for damage or corrosion.
6. Is a P00FF code serious on a 2016 GMC Sierra?
It depends on the underlying issue. While the BCM’s request for MIL illumination might not directly affect drivability, the root cause should be diagnosed and repaired promptly to avoid further electrical issues.
7. Can I clear the P00FF code without repairing the problem?
Clearing the code without addressing the cause may result in the MIL turning back on, as the BCM will likely detect the issue again.
8. How much does it cost to fix a P00FF code on a 2016 GMC Sierra?
Repair costs vary widely depending on the issue. Wiring fixes might cost $100–$300, while BCM replacement can range from $500 to $1,200, including parts and labor.
9. Can a dead battery trigger the P00FF code on a 2016 GMC Sierra?
Yes, a weak or dead battery can cause communication errors between modules, potentially triggering the P00FF code.
10. Should I replace the Body Control Module to fix the P00FF code?
Replacing the BCM should only be done after thorough diagnostics confirm it as the root cause. Often, the issue can be resolved by repairing wiring or reprogramming the module.
Discuss the causes and fixes for P00FF 2016 GMC Sierra OBDII Code
-
-
On your 2016 GMC Sierra, the code P00FF with “MIL activate” means the Body Control Module (BCM) has requested the Malfunction Indicator Lamp (Check Engine Light) to turn on.
This code by itself doesn’t point to the exact problem — it’s more of a “message” from the BCM telling the ECM to light the MIL. You’ll need to check for any other stored codes in the BCM, ECM, or transmission modules to see what triggered it.
In most cases:
- Clear the code and see if it comes back.
- If it does, scan all modules (not just the engine) — the BCM may be flagging something like a communication error, emissions-related fault, or electrical issue.
So “MIL activate” just means the BCM told the system to switch on the check engine light, but the real cause is in the underlying codes.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
