P00F4 2017 GMC Sierra Code - Intake Air Humidity Sensor Circuit Low Voltage
Quick Answer
The Intake Air Humidity Sensor measures the ambient humidity of the air in the sensor bore. Common causes include Faulty Intake Air Humidity Sensor, Intake Air Humidity Sensor harness is open or shorted, Intake Air Humidity Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P00F4 2017 GMC Sierra indicates Intake Air Humidity Sensor Circuit Low Voltage.
- Common causes
- Common causes include Faulty Intake Air Humidity Sensor, Intake Air Humidity Sensor harness is open or shorted, Intake Air Humidity Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P00F4 2017 GMC Sierra Description
What are the Possible Causes of the DTC P00F4 2017 GMC Sierra?
- Faulty Intake Air Humidity Sensor
- Intake Air Humidity Sensor harness is open or shorted
- Intake Air Humidity Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P00F4 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P00F4 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P00F4 2017 GMC Sierra code?
Need more information on how to fix the P00F4 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P00F4 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P00F4 2017 GMC Sierra Code
1. What does the OBDII code P00F4 mean on a 2017 GMC Sierra?
The P00F4 code indicates a problem with the Intake Air Humidity Sensor Circuit, specifically that it is experiencing low voltage.
2. What are common symptoms of the P00F4 code in a 2017 GMC Sierra?
Symptoms may include poor engine performance, reduced fuel efficiency, irregular idle, or the Check Engine Light being illuminated.
3. What causes the P00F4 code to be triggered?
Common causes include a faulty intake air humidity sensor, damaged wiring or connectors in the sensor circuit, or issues with the vehicle's engine control module (ECM).
4. Can I drive my 2017 GMC Sierra with the P00F4 code?
While the vehicle may still be drivable, continuing to drive with this code can lead to reduced performance and potentially further damage to the engine system.
5. How do I diagnose the P00F4 code on my GMC Sierra?
Start by inspecting the intake air humidity sensor and its wiring for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.
6. How can I fix the P00F4 code on a 2017 GMC Sierra?
Repairs may involve replacing the intake air humidity sensor, repairing or replacing damaged wiring, or reprogramming/updating the ECM if necessary.
7. Where is the intake air humidity sensor located on a 2017 GMC Sierra?
The intake air humidity sensor is typically integrated into the air intake system, often near the air filter housing or intake manifold.
8. How much does it cost to repair the P00F4 code on a GMC Sierra?
The repair cost can vary but typically ranges from $100 to $300, depending on whether the sensor, wiring, or ECM needs attention.
9. Can a dirty air filter trigger the P00F4 code?
A dirty air filter is unlikely to directly trigger this code but can contribute to airflow issues, which may exacerbate sensor-related problems.
10. Will resetting the Check Engine Light fix the P00F4 code?
Resetting the light may temporarily clear the code, but the underlying issue will need to be addressed to prevent the code from returning.
Discuss the causes and fixes for P00F4 2017 GMC Sierra OBDII Code
Code P00F4 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
