P00EC 2018 GMC Sierra Code - Intake Air Temperature Sensor 3 Circuit Erratic
Quick Answer
The Intake Air Temperature (IAT) Sensor 3 is a variable resistor that changes an Engine Control Module (ECM) supplied 5 V signal. Common causes include Faulty Intake Air Temperature (IAT) Sensor 3 (Integrated with the Intake Manifold Pressure and Air Temperature Sensor), Intake Air Temperature Sensor 3 harness is open or shorted, Intake Air Temperature Sensor 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P00EC 2018 GMC Sierra indicates Intake Air Temperature Sensor 3 Circuit Erratic.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) Sensor 3 (Integrated with the Intake Manifold Pressure and Air Temperature Sensor), Intake Air Temperature Sensor 3 harness is open or shorted, Intake Air Temperature Sensor 3 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P00EC 2018 GMC Sierra Description
What are the Possible Causes of the DTC P00EC 2018 GMC Sierra?
- Faulty Intake Air Temperature (IAT) Sensor 3 (Integrated with the Intake Manifold Pressure and Air Temperature Sensor)
- Intake Air Temperature Sensor 3 harness is open or shorted
- Intake Air Temperature Sensor 3 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P00EC 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P00EC 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P00EC 2018 GMC Sierra code?
Need more information on how to fix the P00EC 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P00EC 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P00EC 2018 GMC Sierra Code
1. What are common symptoms of OBDII code P00EC in a 2018 GMC Sierra related to the Intake Air Temperature Sensor 3 Circuit Erratic?
The common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What could be causing the Intake Air Temperature Sensor 3 Circuit Erratic code (P00EC) in a 2018 GMC Sierra?
Possible causes include a faulty intake air temperature sensor, damaged wiring or connectors, a dirty air filter affecting sensor readings, or issues with the engine control module.
3. How can I diagnose the cause of the Intake Air Temperature Sensor 3 Circuit Erratic code in my 2018 GMC Sierra?
You can start by visually inspecting the sensor and its wiring for any visible damage. Using a multimeter, test the sensor's resistance and voltage values to determine if it is functioning properly.
4. Can a dirty air filter trigger the OBDII code P00EC in a 2018 GMC Sierra?
Yes, a dirty air filter can affect the readings of the intake air temperature sensor, leading to erratic data and triggering the P00EC code.
5. Is it safe to continue driving my 2018 GMC Sierra with the Intake Air Temperature Sensor 3 Circuit Erratic code active?
It is not recommended to drive with the P00EC code active, as it can potentially lead to further engine issues and worsen fuel efficiency over time. It's best to address the problem promptly.
6. How can I clear the OBDII code P00EC on my 2018 GMC Sierra after repairing the Intake Air Temperature Sensor 3 Circuit issue?
After repairing the issue causing the P00EC code, you can clear it using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes to reset the system.
7. Can a DIY enthusiast repair the Intake Air Temperature Sensor 3 Circuit Erratic issue in a 2018 GMC Sierra?
Depending on your skill level and access to tools, you may be able to replace the intake air temperature sensor or check the wiring yourself. However, for complex issues, it's best to consult a professional mechanic.
8. Will a faulty Intake Air Temperature Sensor 3 affect the overall performance of my 2018 GMC Sierra?
Yes, a faulty sensor can lead to incorrect air-to-fuel ratios, affecting engine performance, fuel efficiency, and potentially causing drivability issues in your GMC Sierra.
9. How do I prevent the recurrence of the Intake Air Temperature Sensor 3 Circuit Erratic code in my 2018 GMC Sierra?
Regularly inspect and maintain the intake air temperature sensor, replace the air filter as recommended, and address any engine issues promptly to prevent the code from recurring.
10. Can extreme weather conditions impact the Intake Air Temperature Sensor 3 Circuit in a 2018 GMC Sierra?
Yes, extreme temperatures can affect the sensor's readings and trigger the P00EC code. Ensure proper insulation and shielding for the sensor to prevent weather-related issues.
Discuss the causes and fixes for P00EC 2018 GMC Sierra OBDII Code
Code P00EC 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
