AutoCodes – Ford – P00CE 2020 Ford F150

P00CE 2020 Ford F150 Code - Intake Air Temperature Measurement System Multiple Sensor Correlation

Quick Answer

The Powertrain Control Module (PCM) monitors the intake air system for concerns at ignition start. Common causes include Faulty Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) or Intake Air Temperature 2 (IAT2) Sensor, Contaminated or blocked sensors, Slow responding sensors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P00CE 2020 Ford F150 indicates Intake Air Temperature Measurement System Multiple Sensor Correlation.
Common causes: Common causes include Faulty Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) or Intake Air Temperature 2 (IAT2) Sensor, Contaminated or blocked sensors, Slow responding sensors.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 165

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 20, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P00CE 2020 Ford F150 Description

The Powertrain Control Module (PCM) monitors the intake air system for concerns at ignition start. The test fails when the Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) and the Intake Air Temperature 2 (IAT2) Parameter Identifications (PIDs) are each more than 16.67°C (30°F) different from each other at start-up. The Diagnostic Trouble Code (DTC) will be set when the PCM detects that each sensor is out of the calibrated range at engine start-up after a soak period of at least 6 hours when a block heater is not used.

OBDII Code P00CE 2020 Ford F150 - Intake Air Temperature Measurement System Multiple Sensor Correlation - AutoCodes.com — P00CE 2020 Ford F150 Code - Intake Air Temperature Measurement System Multiple Sensor Correlation

What does this mean?

What are the Possible Causes of the DTC P00CE 2020 Ford F150?

Faulty Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) or Intake Air Temperature 2 (IAT2) Sensor
Contaminated or blocked sensors
Slow responding sensors

How to Fix the DTC P00CE 2020 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P00CE 2020 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P00CE 2020 Ford F150 code?

Need more information on how to fix the P00CE 2020 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P00CE 2020 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P00CE 2020 Ford F150 Code

What does the OBDII code P00CE mean for a 2020 Ford F150?

P00CE indicates a problem with the intake air temperature measurement system, specifically that multiple sensors are providing inconsistent readings.

What are the common symptoms associated with the P00CE code?

Common symptoms include poor engine performance, reduced fuel efficiency, check engine light illumination, and potential issues with air intake temperature readings.

What could cause the P00CE code to trigger in a 2020 Ford F150?

Possible causes include faulty intake air temperature sensors, wiring issues such as short circuits or corrosion, or a malfunctioning engine control module (ECM).

How can I diagnose the P00CE code in my Ford F150?

Use an OBDII scanner to retrieve the code and any related codes. Inspect the intake air temperature sensors and their wiring for damage or corrosion, and test the sensors' functionality.

What repairs might be necessary if my F150 has the P00CE code?

Repairs may include replacing faulty intake air temperature sensors, repairing or replacing damaged wiring, or reprogramming or replacing the ECM if it's determined to be faulty.

Can I drive my 2020 Ford F150 with the P00CE code?

While it may be possible to drive the vehicle, it is not recommended as it can lead to decreased performance, lower fuel efficiency, and potential long-term engine damage.

How much does it typically cost to fix the P00CE code on a Ford F150?

Repair costs can vary widely depending on the specific issue, but sensor replacement can range from $100 to $300, while more complex wiring or ECM issues may cost more.

Is the P00CE code a serious issue for my vehicle?

Yes, it can be serious as it may affect engine performance and efficiency. It's advisable to address the issue promptly to prevent further damage.

Can I reset the P00CE code after repairs, or does it require professional service?

You can reset the code using an OBDII scanner after repairs, but if the underlying issue hasn't been resolved, the code is likely to reappear. It's best to ensure all problems are fixed before resetting.