P00CE 2019 Ford F150 Code - Intake Air Temperature Measurement System Multiple Sensor Correlation
Quick Answer
The Powertrain Control Module (PCM) monitors the intake air system for concerns at ignition start. Common causes include Faulty Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) or Intake Air Temperature 2 (IAT2) Sensor, Contaminated or blocked sensors, Slow responding sensors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P00CE 2019 Ford F150 indicates Intake Air Temperature Measurement System Multiple Sensor Correlation.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) or Intake Air Temperature 2 (IAT2) Sensor, Contaminated or blocked sensors, Slow responding sensors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P00CE 2019 Ford F150 Description
What are the Possible Causes of the DTC P00CE 2019 Ford F150?
- Faulty Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) or Intake Air Temperature 2 (IAT2) Sensor
- Contaminated or blocked sensors
- Slow responding sensors
How to Fix the DTC P00CE 2019 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P00CE 2019 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P00CE 2019 Ford F150 code?
Need more information on how to fix the P00CE 2019 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P00CE 2019 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P00CE 2019 Ford F150 Code
1. What does the OBDII code P00CE indicate on a 2019 Ford F150?
The P00CE code indicates a problem with the intake air temperature measurement system, specifically pointing to an issue with the correlation between multiple sensors.
2. What symptoms might I notice if my 2019 Ford F150 is showing a P00CE code?
Common symptoms include a decrease in engine performance, irregular idle, increased fuel consumption, and the engine may run hotter than usual.
3. What causes the P00CE code to appear on a 2019 Ford F150?
This code can be triggered by several issues, such as faulty intake air temperature sensors, wiring issues in the sensor circuit, or problems with the engine control module (ECM).
4. How can I diagnose the P00CE code on my 2019 Ford F150?
Diagnosis should start with reading the engine codes using an OBDII scanner, followed by a visual inspection of the intake air temperature sensors and associated wiring. Testing sensor function with a multimeter can also help pinpoint the issue.
5. What are the steps to fix the P00CE code in a 2019 Ford F150?
Repair steps typically include replacing faulty intake air temperature sensors, repairing or replacing damaged wires or connectors in the sensor circuit, and in some cases, updating or replacing the ECM.
6. Is it safe to drive my 2019 Ford F150 with the P00CE code active?
While the vehicle may still be drivable, it's not advisable to continue driving without addressing the issue, as it can lead to decreased performance and increased fuel consumption, which could cause further damage to the engine.
7. How urgent is it to repair a P00CE code on a 2019 Ford F150?
It is fairly urgent to address this issue to avoid potential engine damage and to restore optimal engine performance and fuel efficiency.
8. Can a P00CE code affect the fuel economy of my 2019 Ford F150?
Yes, this code can lead to increased fuel consumption due to the engine control module receiving incorrect air temperature readings, which affects the air-fuel mixture.
9. What tools are required to diagnose and fix a P00CE code on a 2019 Ford F150?
Tools needed include an OBDII scanner, a multimeter for testing sensor functionality, and basic hand tools for replacing sensors or repairing wiring.
10. Can a P00CE code come back after it has been cleared on a 2019 Ford F150?
Yes, if the underlying issue is not properly addressed, the P00CE code can reappear. It's important to ensure all repairs are thorough and all faulty components are replaced or repaired.
Discuss the causes and fixes for P00CE 2019 Ford F150 OBDII Code
Code P00CE 2019 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
