AutoCodes – Ford – P00CE 2017 Ford F150

P00CE 2017 Ford F150 Code - Intake Air Temperature Measurement System Multiple Sensor Correlation

Quick Answer

The Powertrain Control Module (PCM) monitors the intake air system for concerns at ignition start. Common causes include Faulty Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) or Intake Air Temperature 2 (IAT2) Sensor, Contaminated or blocked sensors, Slow responding sensors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P00CE 2017 Ford F150 indicates Intake Air Temperature Measurement System Multiple Sensor Correlation.
Common causes: Common causes include Faulty Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) or Intake Air Temperature 2 (IAT2) Sensor, Contaminated or blocked sensors, Slow responding sensors.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 176

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 20, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P00CE 2017 Ford F150 Description

The Powertrain Control Module (PCM) monitors the intake air system for concerns at ignition start. The test fails when the Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) and the Intake Air Temperature 2 (IAT2) Parameter Identifications (PIDs) are each more than 16.67°C (30°F) different from each other at start-up. The Diagnostic Trouble Code (DTC) will be set when the PCM detects that each sensor is out of the calibrated range at engine start-up after a soak period of at least 6 hours when a block heater is not used.

OBDII Code P00CE 2017 Ford F150 - Intake Air Temperature Measurement System Multiple Sensor Correlation - AutoCodes.com — P00CE 2017 Ford F150 Code - Intake Air Temperature Measurement System Multiple Sensor Correlation

What does this mean?

What are the Possible Causes of the DTC P00CE 2017 Ford F150?

Faulty Intake Air Temperature (IAT), Charge Air Cooler Temperature (CACT) or Intake Air Temperature 2 (IAT2) Sensor
Contaminated or blocked sensors
Slow responding sensors

How to Fix the DTC P00CE 2017 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P00CE 2017 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P00CE 2017 Ford F150 code?

Need more information on how to fix the P00CE 2017 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P00CE 2017 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P00CE 2017 Ford F150 Code

1. What does OBDII code P00CE mean for a 2017 Ford F150?

This code indicates an issue with the Intake Air Temperature Measurement System Multiple Sensor Correlation.

2. What are the common symptoms of OBDII code P00CE in a 2017 Ford F150?

Common symptoms include poor engine performance, rough idling, reduced fuel efficiency, and potentially the illumination of the check engine light.

3. What are some possible causes of OBDII code P00CE in a 2017 Ford F150?

Potential causes include faulty intake air temperature sensors, wiring issues, sensor calibration problems, or a malfunctioning Engine Control Module (ECM).

4. How can I diagnose the OBDII code P00CE in my 2017 Ford F150?

Diagnosing this code typically involves using an OBDII scanner to retrieve the fault codes, checking the intake air temperature sensor readings, inspecting wiring connections, and performing a thorough visual inspection.

5. What are the repair options for OBDII code P00CE in a 2017 Ford F150?

Repair options may include replacing faulty intake air temperature sensors, repairing damaged wiring, recalibrating sensors, or resetting the ECM.

6. Can I drive my 2017 Ford F150 with OBDII code P00CE?

It is not recommended to drive your vehicle with this code present, as it can lead to potential engine performance issues and reduced fuel efficiency.

7. How much does it typically cost to repair OBDII code P00CE in a 2017 Ford F150?

The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Are there any DIY tips for troubleshooting OBDII code P00CE in a 2017 Ford F150?

DIY tips may include checking and cleaning the intake air temperature sensors, inspecting wiring for damage, and ensuring proper sensor connections.

9. How urgent is it to address OBDII code P00CE in a 2017 Ford F150?

While the vehicle may still be operable with this code present, it is recommended to address the issue promptly to prevent potential further damage to the engine.

10. Can OBDII code P00CE in a 2017 Ford F150 be a recurring problem?

If the underlying cause of the code is not properly addressed, it is possible for the issue to recur. Ensure thorough diagnostics and repairs are conducted to prevent future occurrences.