P00C6 2015 Chevrolet Silverado Code - Fuel Rail Pressure Low During Engine Cranking
Quick Answer
The fuel rail pressure sensor detects fuel pressure within the fuel rail. Common causes include Faulty High Pressure Fuel Pump, Faulty Fuel Rail Pressure Sensor, High Pressure Fuel Pump harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P00C6 2015 Chevrolet Silverado indicates Fuel Rail Pressure Low During Engine Cranking.
- Common causes
- Common causes include Faulty High Pressure Fuel Pump, Faulty Fuel Rail Pressure Sensor, High Pressure Fuel Pump harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P00C6 2015 Chevrolet Silverado Description
High pressure fuel is regulated by the high-pressure fuel pump actuator, which is a part of the high-pressure fuel pump. The high-pressure fuel pump actuator is a solenoid valve. The ECM provides a voltage on the actuator high control circuit and ground on the actuator low control circuit. Both circuits are controlled through output drivers within the ECM. When deactivated, both drivers are disabled. When activated, the high control circuit driver energizes the high-pressure fuel pump actuator, and the low control circuit driver Pulse-Width Modulates (PWM) the low control circuit to ground.
The high-pressure mechanical fuel pump is driven by three lobes on the camshaft. The ECM uses the camshaft and crankshaft position sensor inputs to synchronize the high-pressure fuel pump actuator with the position of each of the camshaft lobes. The ECM regulates fuel pressure by adjusting the portion of each pump stroke that provides fuel to the rail.
The ECM monitors the fuel rail fuel pressure sensor and the high-pressure fuel pump actuator to determine if the commanded and actual pressure are within a predetermined range, or if the amount of fuel pressure correction exceeds a calibrated pressure.
The Diagnostic Trouble Code (DTC) will set if the ECM detects that the fuel pressure is not rising or has fallen beyond acceptable limits during engine cranking.
What are the Possible Causes of the DTC P00C6 2015 Chevrolet Silverado?
- Faulty High Pressure Fuel Pump
- Faulty Fuel Rail Pressure Sensor
- High Pressure Fuel Pump harness is open or shorted
- High Pressure Fuel Pump electrical circuit poor connection
How to Fix the DTC P00C6 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P00C6 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P00C6 2015 Chevrolet Silverado code?
Need more information on how to fix the P00C6 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P00C6 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P00C6 2015 Chevrolet Silverado Code
What does the OBDII code P00C6 mean for a 2015 Chevrolet Silverado?
The OBDII code P00C6 indicates that the fuel rail pressure is low during engine cranking, which suggests that the engine may not be receiving enough fuel to start properly.
What are common symptoms of the P00C6 code in a Chevrolet Silverado?
Common symptoms include difficulty starting the engine, rough idling, stalling, and decreased engine performance.
What could cause the P00C6 code to trigger in my Silverado?
Possible causes include a failing fuel pump, clogged fuel filter, faulty fuel pressure regulator, or issues with the fuel injectors.
How can I diagnose the P00C6 code effectively?
To diagnose the P00C6 code, check the fuel pressure with a gauge, inspect the fuel pump and filter, and verify the operation of the fuel pressure regulator and injectors.
What should I check first if my Silverado shows the P00C6 code?
Start by checking the fuel pump operation and fuel pressure readings to ensure they meet the manufacturer's specifications.
Can a dirty fuel filter lead to the P00C6 code?
Yes, a clogged or dirty fuel filter can restrict fuel flow, leading to low fuel pressure and triggering the P00C6 code.
What repairs can fix the P00C6 code in my Chevrolet Silverado?
Repairs may include replacing the fuel pump, changing the fuel filter, fixing or replacing the fuel pressure regulator, or cleaning/replacing fuel injectors.
Is it safe to drive with the P00C6 code present?
It’s not recommended to drive with the P00C6 code as it can lead to engine performance issues and potential stalling, which may be unsafe.
How can I prevent the P00C6 code from occurring in the future?
Regular maintenance, including changing the fuel filter and ensuring the fuel system is clean, can help prevent low fuel pressure issues and the P00C6 code.
Discuss the causes and fixes for P00C6 2015 Chevrolet Silverado OBDII Code
Code P00C6 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
