AutoCodes – Ford – P00BE 2018 Ford F150

P00BE 2018 Ford F150 Code - Mass Airflow 'B' Circuit Range/Performance Air Flow Too Low

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Faulty Mass Airflow (MAF) 'B' Sensor, Mass Airflow 'B' Sensor harness is open or shorted, Mass Airflow 'B' Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P00BE 2018 Ford F150 indicates Mass Airflow 'B' Circuit Range/Performance Air Flow Too Low.
Common causes: Common causes include Faulty Mass Airflow (MAF) 'B' Sensor, Mass Airflow 'B' Sensor harness is open or shorted, Mass Airflow 'B' Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 159

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 18, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P00BE 2018 Ford F150 Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) will be set when the Mass Airflow 'A' Sensor (MAF11) value is within the expected range for the current operating conditions, and the Mass Airflow 'B' Sensor (MAF21) value is less than the MAF11 value.

OBDII Code P00BE 2018 Ford F150 - Mass Airflow 'B' Circuit Range/Performance Air Flow Too Low - AutoCodes.com — P00BE 2018 Ford F150 Code - Mass Airflow 'B' Circuit Range/Performance Air Flow Too Low

What does this mean?

What are the Possible Causes of the DTC P00BE 2018 Ford F150?

Faulty Mass Airflow (MAF) 'B' Sensor
Mass Airflow 'B' Sensor harness is open or shorted
Mass Airflow 'B' Sensor circuit poor electrical connection

How to Fix the DTC P00BE 2018 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P00BE 2018 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P00BE 2018 Ford F150 code?

Need more information on how to fix the P00BE 2018 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P00BE 2018 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P00BE 2018 Ford F150 Code

1. What does the OBDII code P00BE indicate on a 2018 Ford F150?

The P00BE code indicates a potential issue with the Mass Airflow 'B' Circuit Range/Performance on a 2018 Ford F150, specifically detecting air flow that is too low.

2. What are common symptoms of the P00BE code on a 2018 Ford F150?

Common symptoms include reduced engine performance, poor fuel economy, rough idling, stalling, and the illumination of the check engine light.

3. What are possible causes of the P00BE code on a 2018 Ford F150?

Potential causes include a faulty mass airflow sensor, air leaks in the intake system, dirty or clogged air filter, issues with the air intake ducts, or problems with the wiring or connectors related to the mass airflow sensor.

4. How can I diagnose the P00BE code on a 2018 Ford F150?

Diagnosing the P00BE code may involve visually inspecting the air intake system, checking the mass airflow sensor for proper operation, testing the sensor's voltage output, and scanning for any other related codes that could provide additional clues.

5. What are some repair tips for addressing the P00BE code on a 2018 Ford F150?

Repair tips may include cleaning or replacing the air filter, inspecting and repairing any air leaks in the intake system, testing and potentially replacing the mass airflow sensor, and ensuring all wiring and connectors are in good condition.

6. Can I drive my 2018 Ford F150 with the P00BE code present?

It's not recommended to drive your vehicle with the P00BE code active, as it can lead to decreased engine performance and potential damage if the underlying issue is not addressed promptly.

7. Will resetting the OBDII system clear the P00BE code on a 2018 Ford F150?

Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the P00BE code is not fixed, the code is likely to reappear after some driving cycles.

8. How much does it typically cost to repair the P00BE code on a 2018 Ford F150?

The cost of repairing the P00BE code can vary depending on the exact cause of the issue. Costs may range from a simple air filter replacement to a more involved mass airflow sensor replacement, potentially costing a few hundred dollars.

9. Can I fix the P00BE code on a 2018 Ford F150 myself, or should I seek professional help?

Simple tasks like checking the air filter and intake system for issues can be done by DIY enthusiasts. However, diagnosing and replacing the mass airflow sensor or dealing with complex wiring issues may require professional help from a mechanic.

10. How urgent is it to address the P00BE code on a 2018 Ford F150?

While the vehicle may still be operable with the P00BE code present, it's advisable to address the issue promptly to prevent potential damage to the engine and ensure optimal performance and fuel efficiency.