P0098 2018 Honda CR-V Code - Intake Air Temperature Sensor 2 Circuit High Voltage
Quick Answer
The Intake Air Temperature (IAT) Sensor 2 is a thermistor that detects intake air temperature, and it is used for air/fuel ratio feedback control to compensate for the atmospheric density fluctuations that accompany changes in intake air temperature. Common causes include Faulty Intake Air Temperature Sensor 2, Intake Air Temperature Sensor 2 harness is open or shorted, Intake Air Temperature Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0098 2018 Honda CR-V indicates Intake Air Temperature Sensor 2 Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor 2, Intake Air Temperature Sensor 2 harness is open or shorted, Intake Air Temperature Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0098 2018 Honda CR-V Description
What are the Possible Causes of the DTC P0098 2018 Honda CR-V?
- Faulty Intake Air Temperature Sensor 2
- Intake Air Temperature Sensor 2 harness is open or shorted
- Intake Air Temperature Sensor 2 circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0098 2018 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0098 2018 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0098 2018 Honda CR-V code?
Need more information on how to fix the P0098 2018 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0098 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0098 2018 Honda CR-V Code
1. What are the common symptoms of OBDII code P0098 on a 2018 Honda CR-V?
When the Intake Air Temperature Sensor 2 Circuit shows high voltage, you may experience issues like poor engine performance, decreased fuel efficiency, and potential stalling.
2. What could cause the Intake Air Temperature Sensor 2 Circuit to show high voltage in a 2018 Honda CR-V?
Potential causes of the high voltage reading may include a faulty intake air temperature sensor, damaged wiring or connectors, or issues with the engine control module (ECM).
3. How serious is OBDII code P0098 on a 2018 Honda CR-V?
While the high voltage reading itself may not cause immediate damage, ignoring the issue can lead to reduced engine performance and fuel efficiency over time. It's recommended to address the problem promptly.
4. Can I continue driving my 2018 Honda CR-V with OBDII code P0098?
It's generally not advised to drive with a faulty intake air temperature sensor, as it can affect engine performance and fuel efficiency. It's best to have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose the Intake Air Temperature Sensor 2 Circuit high voltage issue on my 2018 Honda CR-V?
Diagnosing the problem typically involves using an OBDII scanner to retrieve the fault code, inspecting the sensor and related wiring for any visible damage, and testing the sensor's resistance to determine if it's functioning correctly.
6. Can I fix the Intake Air Temperature Sensor 2 Circuit high voltage issue in my 2018 Honda CR-V myself?
If you have experience with automotive repairs and access to the necessary tools, you may be able to replace the faulty intake air temperature sensor or repair any damaged wiring yourself. However, if you're unsure, it's best to consult a professional mechanic.
7. How much does it cost to repair OBDII code P0098 on a 2018 Honda CR-V?
The cost of repairing the Intake Air Temperature Sensor 2 Circuit high voltage issue can vary depending on the exact cause of the problem, the cost of the replacement parts, and labor charges. It's advisable to obtain quotes from different repair shops for an accurate estimate.
8. Will resetting the OBDII code P0098 on my 2018 Honda CR-V make the problem go away?
Resetting the fault code may temporarily turn off the check engine light, but it won't fix the underlying issue causing the high voltage reading. It's important to diagnose and repair the problem to prevent further complications.
9. What are some tips to prevent OBDII code P0098 from recurring in my 2018 Honda CR-V?
Regular maintenance and inspections, such as checking the condition of the intake air temperature sensor and its wiring, can help prevent the recurrence of the high voltage issue. Keeping up with recommended service schedules is key.
10. Is the Intake Air Temperature Sensor 2 Circuit high voltage issue a common problem in 2018 Honda CR-V vehicles?
While it may not be extremely common, issues with the intake air temperature sensor can occur in any vehicle, including the 2018 Honda CR-V. Proper maintenance and timely repairs can help address such problems effectively.
Discuss the causes and fixes for P0098 2018 Honda CR-V OBDII Code
Code P0098 2018 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
