P0098 2006 Ford Fusion Code - Intake Air Temperature Sensor 2 Circuit High Voltage
Quick Answer
The Intake Air Temperature (IAT) sensor contains a semiconductor device which changes the resistance based on the temperature (a thermistor). Common causes include Faulty Intake Air Temperature Sensor, Faulty Map Senor/Intake Air Temperature Sensor 2, Intake Air Temperature sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0098 2006 Ford Fusion indicates Intake Air Temperature Sensor 2 Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor, Faulty Map Senor/Intake Air Temperature Sensor 2, Intake Air Temperature sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0098 2006 Ford Fusion Description
What are the Possible Causes of the DTC P0098 2006 Ford Fusion?
- Faulty Intake Air Temperature Sensor
- Faulty Map Senor/Intake Air Temperature Sensor 2
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
How to Fix the DTC P0098 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0098 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0098 2006 Ford Fusion code?
Need more information on how to fix the P0098 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0098 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0098 2006 Ford Fusion Code
1. What does the OBDII code P0098 mean for a 2006 Ford Fusion?
P0098 indicates that the Intake Air Temperature (IAT) Sensor 2 circuit is detecting a voltage level higher than the sensor's specified range.
2. What are the symptoms of the P0098 code in a 2006 Ford Fusion?
Symptoms may include poor engine performance, rough idling, reduced fuel efficiency, or the check engine light illuminating.
3. What causes the P0098 code in a 2006 Ford Fusion?
Common causes include a faulty IAT sensor, damaged or corroded wiring, a disconnected sensor, or a malfunctioning engine control module (ECM).
4. Can I drive my 2006 Ford Fusion with a P0098 code?
While the car may still be drivable, continuing to drive with this code can lead to poor engine performance and potential long-term damage. It's best to address the issue promptly.
5. How do I diagnose the P0098 code on a 2006 Ford Fusion?
Start by inspecting the IAT sensor and its wiring for damage or corrosion. Use a multimeter to check the sensor's voltage and resistance, and compare it to manufacturer specifications.
6. How do I fix the P0098 error code in a 2006 Ford Fusion?
Repairs may involve replacing the IAT sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming/replacing the ECM if necessary.
7. Where is the Intake Air Temperature Sensor 2 located on a 2006 Ford Fusion?
The IAT Sensor 2 is typically located in the intake manifold or integrated into the mass airflow (MAF) sensor, depending on the engine configuration.
8. What tools are needed to fix the P0098 code on a 2006 Ford Fusion?
You may need an OBDII scanner, a multimeter, basic hand tools, and possibly replacement parts like an IAT sensor or wiring connectors.
9. How much does it cost to repair a P0098 code on a 2006 Ford Fusion?
Repair costs can vary but typically range from $50 to $200, depending on whether you need to replace the IAT sensor, repair wiring, or address additional issues.
10. Can a dirty air filter cause the P0098 code on a 2006 Ford Fusion?
While unlikely, a severely clogged air filter could potentially affect air intake readings. It's best to inspect the air filter as part of the diagnosis.
Discuss the causes and fixes for P0098 2006 Ford Fusion OBDII Code
Code P0098 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
