P0097 2019 Honda CR-V Code - Intake Air Temperature Sensor 2 Circuit Low Input
Quick Answer
The Intake Air Temperature (IAT) Sensor 2 is a thermistor that detects intake air temperature, and it is used for air/fuel ratio feedback control to compensate for the atmospheric density fluctuations that accompany changes in intake air temperature. Common causes include Faulty Intake Air Temperature Sensor 2, Intake Air Temperature Sensor 2 harness is open or shorted, Intake Air Temperature Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0097 2019 Honda CR-V indicates Intake Air Temperature Sensor 2 Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor 2, Intake Air Temperature Sensor 2 harness is open or shorted, Intake Air Temperature Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0097 2019 Honda CR-V Description
What are the Possible Causes of the DTC P0097 2019 Honda CR-V?
- Faulty Intake Air Temperature Sensor 2
- Intake Air Temperature Sensor 2 harness is open or shorted
- Intake Air Temperature Sensor 2 circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0097 2019 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0097 2019 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0097 2019 Honda CR-V code?
Need more information on how to fix the P0097 2019 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0097 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0097 2019 Honda CR-V Code
1. What are the common symptoms of OBDII code P0097 in a 2019 Honda CR-V?
The common symptoms of OBDII code P0097 in a 2019 Honda CR-V include poor engine performance, decreased fuel efficiency, and the Check Engine light illuminating on the dashboard.
2. What does the OBDII code P0097 "Intake Air Temperature Sensor 2 Circuit Low Input" mean in a 2019 Honda CR-V?
The OBDII code P0097 in a 2019 Honda CR-V indicates that there is a low input signal detected from the Intake Air Temperature Sensor 2 circuit.
3. What are the possible causes of OBDII code P0097 in a 2019 Honda CR-V?
Possible causes of OBDII code P0097 in a 2019 Honda CR-V include a faulty intake air temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module.
4. How can I diagnose the OBDII code P0097 in my 2019 Honda CR-V?
Diagnosing OBDII code P0097 in a 2019 Honda CR-V involves checking the intake air temperature sensor for proper voltage and resistance, inspecting the sensor wiring and connectors for damage, and scanning the vehicle's computer for any related fault codes.
5. Can I continue driving my 2019 Honda CR-V with OBDII code P0097?
While it may be possible to drive the vehicle with OBDII code P0097, it is not recommended as it can lead to poor engine performance and reduced fuel efficiency. It is recommended to address the issue promptly.
6. How can I repair OBDII code P0097 in my 2019 Honda CR-V?
Repairing OBDII code P0097 in a 2019 Honda CR-V may involve replacing the intake air temperature sensor, repairing or replacing damaged wiring or connectors in the sensor circuit, or reprogramming the engine control module.
7. Is OBDII code P0097 a serious issue in a 2019 Honda CR-V?
While OBDII code P0097 may not cause immediate harm to the vehicle, it can lead to engine performance issues and decreased fuel efficiency over time if left unaddressed. It is recommended to have the issue diagnosed and repaired promptly.
8. Can a DIY enthusiast fix OBDII code P0097 in a 2019 Honda CR-V?
Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to diagnose and repair OBDII code P0097 in a 2019 Honda CR-V. However, it is recommended to seek professional help if unsure about the repair process.
9. How much does it cost to repair OBDII code P0097 in a 2019 Honda CR-V?
The cost to repair OBDII code P0097 in a 2019 Honda CR-V can vary depending on the specific cause of the issue, labor rates in your area, and whether genuine parts are used. It is advisable to obtain a few repair quotes from reputable mechanics.
10. Will resetting the Check Engine light resolve OBDII code P0097 in my 2019 Honda CR-V?
Simply resetting the Check Engine light will not resolve OBDII code P0097 in a 2019 Honda CR-V. The underlying issue causing the fault code needs to be diagnosed and repaired to prevent the light from coming back on.
Discuss the causes and fixes for P0097 2019 Honda CR-V OBDII Code
Code P0097 2019 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
