P0097 2010 Ford Fusion Code - Intake Air Temperature Sensor 2 Circuit Low Input
Quick Answer
The Intake Air Temperature (IAT) sensor contains a semiconductor device which changes the resistance based on the temperature (a thermistor). Common causes include Faulty Intake Air Temperature Sensor, Faulty Map Senor/Intake Air Temperature Sensor 2, Intake Air Temperature sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0097 2010 Ford Fusion indicates Intake Air Temperature Sensor 2 Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor, Faulty Map Senor/Intake Air Temperature Sensor 2, Intake Air Temperature sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0097 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0097 2010 Ford Fusion?
- Faulty Intake Air Temperature Sensor
- Faulty Map Senor/Intake Air Temperature Sensor 2
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
How to Fix the DTC P0097 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0097 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0097 2010 Ford Fusion code?
Need more information on how to fix the P0097 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0097 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0097 2010 Ford Fusion Code
What does the OBDII code P0097 mean on a 2010 Ford Fusion?
P0097 indicates that the Intake Air Temperature (IAT) Sensor 2 circuit is reporting a voltage input that is lower than the expected range.
What are the common symptoms of the P0097 code?
Common symptoms include a check engine light, poor fuel economy, reduced engine performance, and potential difficulty starting the vehicle.
What causes the P0097 code to appear?
Typical causes include a faulty IAT sensor 2, damaged wiring or connectors, a short circuit, or a problem with the Engine Control Module (ECM).
Can a dirty air filter cause the P0097 code?
While a dirty air filter is not a direct cause, restricted airflow could indirectly affect IAT sensor readings and should be checked during diagnosis.
How do I diagnose the P0097 code?
Start by inspecting the IAT sensor 2, its wiring, and connectors for damage or corrosion. Use a multimeter to test for proper voltage and resistance in the circuit.
Where is the IAT sensor 2 located on a 2010 Ford Fusion?
The IAT sensor 2 is typically integrated with the Mass Airflow Sensor (MAF) or located in the intake air duct near the throttle body.
Can I drive my 2010 Ford Fusion with the P0097 code?
Driving with the P0097 code is possible but not recommended, as it can lead to poor engine performance and increased fuel consumption.
How can I fix the P0097 code?
Repairs may include replacing the IAT sensor 2, repairing or replacing damaged wiring or connectors, or updating/reprogramming the ECM if necessary.
Does the P0097 code reset after repairs?
The code may reset on its own after successful repairs, but clearing it with an OBDII scanner ensures it is erased and allows you to check if it returns.
How much does it cost to fix the P0097 code?
Repair costs vary but typically range from $100 to $300, depending on whether you replace the IAT sensor or repair wiring issues.
Discuss the causes and fixes for P0097 2010 Ford Fusion OBDII Code
Code P0097 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
