P0096 GMC Code - Intake Air Temperature Sensor 2 Circuit Range/Performance
Quick Answer
The Intake Air Temperature (IAT) sensor 1 is a variable resistor that changes the voltage on the Engine Control Module (ECM) supplied 5 V signal circuit. Common causes include Faulty Intake Air Temperature (IAT) sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0096 GMC indicates Intake Air Temperature Sensor 2 Circuit Range/Performance.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0096 GMC Description
What are the Possible Causes of the DTC P0096 GMC?
- Faulty Intake Air Temperature (IAT) sensor
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0096 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0096 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0096 GMC code?
Need more information on how to fix the P0096 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0096 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0096 2014 GMC Sierra — Intake Air Temperature Sensor 2 Circuit Range/Performance
- P0096 2015 GMC Sierra — Intake Air Temperature Sensor 2 Circuit Range/Performance
- P0096 2016 GMC Sierra — Intake Air Temperature Sensor 2 Circuit Range/Performance
- P0096 2017 GMC Sierra — Intake Air Temperature Sensor 2 Circuit Range/Performance
- P0096 2018 GMC Sierra — Intake Air Temperature Sensor 2 Circuit Range/Performance
Frequently Asked Questions about P0096 GMC Code
1. What are the common symptoms of OBDII code P0096 in a GMC vehicle?
The common symptoms of code P0096 include poor engine performance, rough idling, reduced fuel efficiency, and in some cases, the Check Engine Light may illuminate.
2. What does the OBDII code P0096 indicate in a GMC vehicle?
OBDII code P0096 indicates an issue with the Intake Air Temperature Sensor 2 Circuit Range/Performance in the GMC vehicle's engine.
3. What are the possible causes of OBDII code P0096 in a GMC vehicle?
Possible causes of code P0096 in a GMC vehicle include a faulty intake air temperature sensor, wiring issues in the sensor circuit, a disconnected sensor, or a problem with the engine control module (ECM).
4. How can I diagnose the OBDII code P0096 in my GMC vehicle?
Diagnosing OBDII code P0096 involves using an OBDII scanner to retrieve the fault code, inspecting the intake air temperature sensor and its wiring for any visible damage, and testing the sensor's resistance to determine if it is functioning correctly.
5. Can I drive my GMC vehicle with OBDII code P0096?
It is not recommended to drive your GMC vehicle with OBDII code P0096 for an extended period as it can lead to poor engine performance and potential damage. It's best to address the issue promptly.
6. How can I repair OBDII code P0096 in my GMC vehicle?
Repairing OBDII code P0096 in a GMC vehicle may involve replacing the faulty intake air temperature sensor, repairing any damaged wiring or connections, or reprogramming the engine control module (ECM) if necessary.
7. Is it possible to reset OBDII code P0096 in a GMC vehicle?
You can clear the OBDII code P0096 using an OBDII scanner, but it is essential to address the underlying issue causing the code to prevent it from reoccurring.
8. Can a DIYer fix OBDII code P0096 in a GMC vehicle?
Depending on your mechanical skills and access to tools, a DIYer may be able to fix OBDII code P0096 by replacing the intake air temperature sensor or repairing wiring issues. However, for more complex problems, it's advisable to seek professional help.
9. How much does it cost to repair OBDII code P0096 in a GMC vehicle?
The cost of repairing OBDII code P0096 in a GMC vehicle can vary depending on the underlying issue, the cost of parts, and labor rates. It's recommended to get a diagnosis from a mechanic to determine the exact cost.
10. What should I do if OBDII code P0096 keeps coming back in my GMC vehicle?
If OBDII code P0096 keeps coming back after clearing it, it indicates a persistent issue that needs to be properly diagnosed and repaired. Consult a mechanic to identify the root cause and prevent the code from reoccurring.
Discuss the causes and fixes for P0096 GMC OBDII Code
Code P0096 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
