P0096 2018 Ford F150 Code - Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1
Quick Answer
The Intake Air Temperature (IAT) Sensor is a thermistor device in which resistance changes with temperature. Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0096 2018 Ford F150 indicates Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0096 2018 Ford F150 Description
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow. The voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The IAT sensor provides air temperature information to the PCM. The PCM uses the air temperature information as a correction factor in the calculation of fuel, spark, and airflow.
The IAT sensor provides a quicker temperature change response time than the Engine Coolant Temperature (ECT) or Cylinder Head Temperature (CHT) sensor.
Currently, there are 2 types of IAT sensors used, a stand-alone and an integrated type. Both types function the same, however, the integrated type is incorporated into the Mass Air Flow (MAF) Sensor, the Manifold Absolute Pressure and Temperature (MAPT) Sensor, or the Turbocharger Intake Pressure and Temperature (TCIPT) Sensor instead of being a stand-alone sensor.
The Intake Air Temperature 2 (IAT2) Sensor is typically located near the intake manifold and is used to measure the intake manifold temperature. The PCM uses this information to determine the air charge and provide input for various engine control functions. The IAT2 sensor may be integrated with the Manifold Absolute Pressure (MAP) Sensor.
This Diagnostic Trouble Code (DTC) is set when the IAT2 Sensor value does not correlate with the Charge Air Cooler Temperature (CACT) Sensor value or the IAT Sensor value at ignition ON after a calibrated soak period (typically 6 to 8 hours). This DTC also sets if the IAT2 Sensor value exceeds the maximum calibrated temperature threshold while driving.
What are the Possible Causes of the DTC P0096 2018 Ford F150?
- Faulty Intake Air Temperature 2 (IAT2) Sensor
- Intake Air Temperature 2 Sensor harness is open or shorted
- Intake Air Temperature 2 Sensor circuit poor electrical connection
How to Fix the DTC P0096 2018 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0096 2018 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0096 2018 Ford F150 code?
Need more information on how to fix the P0096 2018 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0096 2018 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0096 2018 Ford F150 Code
1. What are the common symptoms of OBDII code P0096 in a 2018 Ford F150?
The common symptoms of OBDII code P0096 in a 2018 Ford F150 include poor engine performance, decreased fuel efficiency, and potentially rough idling.
2. What does the OBDII code P0096 indicate in a 2018 Ford F150?
OBDII code P0096 in a 2018 Ford F150 specifically refers to an issue with the Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1.
3. What are the possible causes of OBDII code P0096 in a 2018 Ford F150?
Possible causes of OBDII code P0096 in a 2018 Ford F150 include a faulty intake air temperature sensor, damaged wiring or connectors, or issues with the sensor's circuitry.
4. How can I diagnose the Intake Air Temperature Sensor 2 Circuit issue on my 2018 Ford F150?
To diagnose the Intake Air Temperature Sensor 2 Circuit issue on your 2018 Ford F150, you can use an OBDII scanner to read the trouble codes, visually inspect the sensor and its wiring for any visible damage, and perform electrical tests to check for proper sensor function.
5. Can I continue driving my 2018 Ford F150 with OBDII code P0096?
It is not recommended to drive your 2018 Ford F150 with OBDII code P0096, as the issue may lead to further engine problems and reduced performance. It is best to address the underlying problem promptly.
6. How can I repair OBDII code P0096 on my 2018 Ford F150?
To repair OBDII code P0096 on your 2018 Ford F150, you may need to replace the faulty Intake Air Temperature Sensor 2, repair or replace damaged wiring or connectors, and clear the trouble codes with an OBDII scanner.
7. Are there any specific maintenance tips to prevent OBDII code P0096 in a 2018 Ford F150?
Regularly inspecting and cleaning the intake air temperature sensor, ensuring proper wiring connections, and following the manufacturer's recommended maintenance schedule can help prevent OBDII code P0096 in a 2018 Ford F150.
8. Can a DIY enthusiast fix OBDII code P0096 in a 2018 Ford F150?
Depending on your skill level and access to tools, a DIY enthusiast may be able to fix OBDII code P0096 in a 2018 Ford F150 by following repair guides, watching tutorials, and being cautious when working on the vehicle's components.
9. Will resetting the OBDII code P0096 in my 2018 Ford F150 make the issue disappear?
Resetting the OBDII code P0096 in your 2018 Ford F150 may temporarily clear the warning light, but if the underlying problem with the Intake Air Temperature Sensor 2 Circuit persists, the code is likely to reappear. It's essential to address the root cause of the issue.
10. Is OBDII code P0096 a serious problem in a 2018 Ford F150?
While OBDII code P0096 may not cause immediate engine failure, it can lead to reduced performance and fuel efficiency in a 2018 Ford F150. It is recommended to address the issue promptly to prevent further complications.
Discuss the causes and fixes for P0096 2018 Ford F150 OBDII Code
Code P0096 2018 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
