AutoCodes – Chevrolet – P0096 2018 Chevrolet Silverado

P0096 2018 Chevrolet Silverado Code - Intake Air Temperature Sensor 2 Circuit Range/Performance

Quick Answer

The Intake Air Temperature (IAT) sensor 1 is a variable resistor that changes the voltage on the Engine Control Module (ECM) supplied 5 V signal circuit. Common causes include Faulty Intake Air Temperature (IAT) sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0096 2018 Chevrolet Silverado indicates Intake Air Temperature Sensor 2 Circuit Range/Performance.
Common causes: Common causes include Faulty Intake Air Temperature (IAT) sensor, Intake Air Temperature sensor harness is open or shorted, Intake Air Temperature sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 309

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 16, 2022

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0096 2018 Chevrolet Silverado Description

The Intake Air Temperature (IAT) sensor 1 is a variable resistor that changes the voltage on the Engine Control Module (ECM) supplied 5 V signal circuit. The signal varies with inlet air temperature in the sensor bore and is displayed by the scan tool as °C (°F). The IAT sensor 2 and the humidity sensor share the same circuit. The IAT sensor 2 signal is displayed by the scan tool as Hertz (Hz) and °C (°F). The Diagnostic Trouble Code (DTC) will be set when the ECM determines the absolute difference between the IAT sensor 1 start-up temperature and the IAT sensor 2 start-up temperature is greater than 25°C (45°F).

OBDII Code P0096 2018 Chevrolet Silverado - Intake Air Temperature Sensor 2 Circuit Range/Performance - AutoCodes.com — P0096 2018 Chevrolet Silverado Code - Intake Air Temperature Sensor 2 Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0096 2018 Chevrolet Silverado?

Faulty Intake Air Temperature (IAT) sensor
Intake Air Temperature sensor harness is open or shorted
Intake Air Temperature sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0096 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The Intake Air Temperature (IAT) sensor 1, IAT sensor 2, Humidity sensor, MAF sensor, and BARO pressure sensor are integrated within the Mass Air Flow / Multifunction Intake Air Sensor.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0096 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0096 2018 Chevrolet Silverado code?

Need more information on how to fix the P0096 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0096 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0096 2018 Chevrolet Silverado Code

1. What does OBDII code P0096 on a 2018 Chevrolet Silverado mean?

The code P0096 indicates an issue with the Intake Air Temperature Sensor 2 Circuit Range/Performance.

2. What are the common symptoms of a P0096 trouble code in a 2018 Chevrolet Silverado?

Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and potential stalling.

3. What are the possible causes of a P0096 trouble code in a 2018 Chevrolet Silverado?

Potential causes include a faulty intake air temperature sensor, wiring issues, a disconnected sensor, or a damaged sensor connector.

4. How can I diagnose a P0096 trouble code in my 2018 Chevrolet Silverado?

Diagnosing the issue involves checking the intake air temperature sensor's wiring and connector for damage, testing sensor resistance, and verifying sensor readings with a scan tool.

5. How can I repair a P0096 trouble code on a 2018 Chevrolet Silverado?

To repair the issue, you may need to replace the intake air temperature sensor, repair any damaged wiring or connectors, and clear the trouble code with a scan tool.

6. Can I drive my 2018 Chevrolet Silverado with a P0096 trouble code?

It is not recommended to drive your vehicle with a P0096 trouble code as it can lead to poor engine performance and potential damage if left unresolved.

7. How important is it to address a P0096 trouble code in a 2018 Chevrolet Silverado?

It is important to address the P0096 code promptly to prevent further engine issues, maintain optimal performance, and improve fuel efficiency.

8. Will resetting the trouble code fix the P0096 issue in a 2018 Chevrolet Silverado?

Resetting the trouble code may temporarily clear the warning light, but if the underlying issue causing the P0096 code is not resolved, the code is likely to reappear.

9. Can a DIY enthusiast fix a P0096 trouble code in a 2018 Chevrolet Silverado?

Depending on your skill level and access to tools, a DIY enthusiast may be able to address a P0096 code by following diagnostic procedures and replacing the faulty components.

10. How much does it typically cost to repair a P0096 trouble code on a 2018 Chevrolet Silverado?

The cost of repairing a P0096 code can vary based on the cause of the issue, but it generally involves the cost of a new intake air temperature sensor and any additional parts or labor required for the repair.