P0096 2017 Ford F150 Code - Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1
Quick Answer
The Intake Air Temperature (IAT) Sensor is a thermistor device in which resistance changes with temperature. Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0096 2017 Ford F150 indicates Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0096 2017 Ford F150 Description
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow. The voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The IAT sensor provides air temperature information to the PCM. The PCM uses the air temperature information as a correction factor in the calculation of fuel, spark, and airflow.
The IAT sensor provides a quicker temperature change response time than the Engine Coolant Temperature (ECT) or Cylinder Head Temperature (CHT) sensor.
Currently, there are 2 types of IAT sensors used, a stand-alone and an integrated type. Both types function the same, however, the integrated type is incorporated into the Mass Air Flow (MAF) Sensor, the Manifold Absolute Pressure and Temperature (MAPT) Sensor, or the Turbocharger Intake Pressure and Temperature (TCIPT) Sensor instead of being a stand-alone sensor.
The Intake Air Temperature 2 (IAT2) Sensor is typically located near the intake manifold and is used to measure the intake manifold temperature. The PCM uses this information to determine the air charge and provide input for various engine control functions. The IAT2 sensor may be integrated with the Manifold Absolute Pressure (MAP) Sensor.
This Diagnostic Trouble Code (DTC) is set when the IAT2 Sensor value does not correlate with the Charge Air Cooler Temperature (CACT) Sensor value or the IAT Sensor value at ignition ON after a calibrated soak period (typically 6 to 8 hours). This DTC also sets if the IAT2 Sensor value exceeds the maximum calibrated temperature threshold while driving.
What are the Possible Causes of the DTC P0096 2017 Ford F150?
- Faulty Intake Air Temperature 2 (IAT2) Sensor
- Intake Air Temperature 2 Sensor harness is open or shorted
- Intake Air Temperature 2 Sensor circuit poor electrical connection
How to Fix the DTC P0096 2017 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0096 2017 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0096 2017 Ford F150 code?
Need more information on how to fix the P0096 2017 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0096 2017 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0096 2017 Ford F150 Code
1. What are the common symptoms of OBDII code P0096 on a 2017 Ford F150?
The common symptoms of code P0096 include poor engine performance, reduced fuel efficiency, and the illumination of the check engine light.
2. What does the OBDII code P0096 indicate in a 2017 Ford F150?
Code P0096 indicates an issue with the Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1 in the intake system of the vehicle.
3. What are the possible causes of OBDII code P0096 on a 2017 Ford F150?
Possible causes of code P0096 include a faulty intake air temperature sensor, wiring or connector issues, intake air leaks, or a problem with the PCM (Powertrain Control Module).
4. How can I diagnose the Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1 issue in my 2017 Ford F150?
Diagnosing the issue involves inspecting the intake air temperature sensor and its wiring for any damage, checking for intake air leaks, and using an OBDII scanner to retrieve and analyze the fault codes.
5. Can I drive my 2017 Ford F150 with OBDII code P0096?
It is not recommended to drive your vehicle with code P0096 as it can lead to poor engine performance and reduced fuel efficiency. It's best to address the issue promptly.
6. How can I repair OBDII code P0096 on my 2017 Ford F150?
Repairing code P0096 may involve replacing the intake air temperature sensor, repairing any damaged wiring or connectors, fixing intake air leaks, or reprogramming the PCM if necessary.
7. Is it necessary to reset the check engine light after fixing OBDII code P0096 on a 2017 Ford F150?
Yes, it's recommended to reset the check engine light using an OBDII scanner after fixing code P0096 to clear the stored fault code and ensure proper monitoring of the vehicle's systems.
8. Will OBDII code P0096 cause any long-term damage to my 2017 Ford F150 if left unrepaired?
Leaving code P0096 unrepaired can potentially cause long-term damage to the engine and affect overall vehicle performance. It's important to address the issue promptly.
9. Can a DIY enthusiast fix OBDII code P0096 on a 2017 Ford F150?
Depending on the individual's experience and tools available, a DIY enthusiast may be able to address code P0096 by following repair guides and using proper diagnostic equipment.
10. How much does it cost to repair OBDII code P0096 on a 2017 Ford F150 at a professional mechanic?
The cost of repairing code P0096 can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor at a professional mechanic's shop.
Discuss the causes and fixes for P0096 2017 Ford F150 OBDII Code
Code P0096 2017 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
