P0096 2015 Ford F150 Code - Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1
Quick Answer
The Intake Air Temperature (IAT) Sensor is a thermistor device in which resistance changes with temperature. Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0096 2015 Ford F150 indicates Intake Air Temperature Sensor 2 Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Air Temperature 2 (IAT2) Sensor, Intake Air Temperature 2 Sensor harness is open or shorted, Intake Air Temperature 2 Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0096 2015 Ford F150 Description
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow. The voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The IAT sensor provides air temperature information to the PCM. The PCM uses the air temperature information as a correction factor in the calculation of fuel, spark, and airflow.
The IAT sensor provides a quicker temperature change response time than the Engine Coolant Temperature (ECT) or Cylinder Head Temperature (CHT) sensor.
Currently, there are 2 types of IAT sensors used, a stand-alone and an integrated type. Both types function the same, however, the integrated type is incorporated into the Mass Air Flow (MAF) Sensor, the Manifold Absolute Pressure and Temperature (MAPT) Sensor, or the Turbocharger Intake Pressure and Temperature (TCIPT) Sensor instead of being a stand-alone sensor.
The Intake Air Temperature 2 (IAT2) Sensor is typically located near the intake manifold and is used to measure the intake manifold temperature. The PCM uses this information to determine the air charge and provide input for various engine control functions. The IAT2 sensor may be integrated with the Manifold Absolute Pressure (MAP) Sensor.
This Diagnostic Trouble Code (DTC) is set when the IAT2 Sensor value does not correlate with the Charge Air Cooler Temperature (CACT) Sensor value or the IAT Sensor value at ignition ON after a calibrated soak period (typically 6 to 8 hours). This DTC also sets if the IAT2 Sensor value exceeds the maximum calibrated temperature threshold while driving.
What are the Possible Causes of the DTC P0096 2015 Ford F150?
- Faulty Intake Air Temperature 2 (IAT2) Sensor
- Intake Air Temperature 2 Sensor harness is open or shorted
- Intake Air Temperature 2 Sensor circuit poor electrical connection
How to Fix the DTC P0096 2015 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0096 2015 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0096 2015 Ford F150 code?
Need more information on how to fix the P0096 2015 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0096 2015 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0096 2015 Ford F150 Code
1. What does the OBDII code P0096 mean on a 2015 Ford F150?
P0096 indicates an issue with the Intake Air Temperature (IAT) Sensor 2 circuit on Bank 1, specifically a range or performance problem.
2. What are the symptoms of code P0096 in a 2015 Ford F150?
Common symptoms include poor fuel efficiency, reduced engine performance, rough idling, or the Check Engine Light being illuminated.
3. What causes the P0096 code in a 2015 Ford F150?
Possible causes include a faulty IAT Sensor 2, damaged wiring or connectors, excessive buildup of dirt or debris on the sensor, or issues with the Powertrain Control Module (PCM).
4. Can I drive my 2015 Ford F150 with a P0096 code?
While the vehicle may still be drivable, it is not recommended to ignore this code, as it can affect fuel efficiency and engine performance over time.
5. How do you diagnose a P0096 code on a 2015 Ford F150?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the IAT Sensor 2 and its wiring, and testing the sensor for proper voltage and resistance.
6. How do you fix the P0096 code on a 2015 Ford F150?
Repairs may include cleaning or replacing the IAT Sensor 2, repairing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.
7. Where is the Intake Air Temperature Sensor 2 located on a 2015 Ford F150?
The IAT Sensor 2 is typically located in the intake manifold or near the air filter housing, depending on the engine configuration.
8. How much does it cost to fix a P0096 code on a 2015 Ford F150?
Repair costs can range from $50 to $300, depending on whether the issue is a simple sensor replacement or requires more extensive repairs.
9. Can a dirty air filter cause a P0096 code on a 2015 Ford F150?
While uncommon, a severely clogged air filter can potentially affect airflow readings and contribute to this code.
10. Does resetting the Check Engine Light fix the P0096 code on a 2015 Ford F150?
Resetting the light will clear the code temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0096 2015 Ford F150 OBDII Code
Code P0096 2015 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
