AutoCodes - Ford - P0096 2010 FORD FUSION

P0096 2010 FORD FUSION Code - Intake Air Temperature Sensor 2 Circuit Range/Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P0096 2010 FORD FUSION code possible causes

  • Faulty Intake Air Temperature Sensor
  • Faulty Map Senor/Intake Air Temperature Sensor 2
  • Map Senor/Intake Air Temperature sensor harness is open or shorted
  • Map Senor/Intake Air Temperature sensor circuit poor electrical connection

|How do I fix the P0096 2010 FORD FUSION code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0096 2010 FORD FUSION code tech notes

Try to clean the Intake Air Temperature sensor (built in the air flow meter) and the Map Senor/Intake Air Temperature sensor 2 with mass air flow sensor cleaner.

|Cost of diagnosing the P0096 2010 FORD FUSION code

Labor: 1.0

The cost of diagnosing the P0096 2010 FORD FUSION code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0096 2010 FORD FUSION code detected?

The Engine Control Module (ECM) has detected a performance fault with the Intake Air Temperature (IAT) sensor.

|What are P0096 2010 FORD FUSION code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|P0096 2010 FORD FUSION code description

The Intake Air Temperature (IAT) sensor contains a semiconductor device which changes the resistance based on the temperature (a thermistor). The IAT sensor is located in the air intake passage of the engine air induction system. The IAT sensor has a signal circuit and a ground circuit.
OBDII Code P0096 2010 Ford Fusion - Intake Air Temperature Sensor 2 Circuit Range/Performance - AutoCodes.com

|Need more information with the P0096 2010 FORD FUSION code?

Need more information on how to fix the P0096 2010 FORD FUSION code?
Get Access to Factory Service Manuals

|Need help with a P0096 2010 FORD FUSION code?

Get the P0096 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

|P0096 2010 FORD FUSION code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0096 2010 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?