P0083 Hyundai Code - Intake Valve Control Solenoid Circuit High Bank 2
Quick Answer
Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Control Solenoid Valve, Intake Valve Control Solenoid Valve harness is open or shorted, Intake Valve Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0083 Hyundai indicates Intake Valve Control Solenoid Circuit High Bank 2.
- Common causes
- Common causes include Faulty Intake Valve Control Solenoid Valve, Intake Valve Control Solenoid Valve harness is open or shorted, Intake Valve Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0083 Hyundai Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0083 Hyundai?
- Faulty Intake Valve Control Solenoid Valve
- Intake Valve Control Solenoid Valve harness is open or shorted
- Intake Valve Control Solenoid Valve circuit poor electrical connection
How to Fix the DTC P0083 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0083 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0083 Hyundai code?
Need more information on how to fix the P0083 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0083 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0083 Hyundai Code
1. What does the OBDII code P0083 mean in a Hyundai?
P0083 indicates an issue with the Intake Valve Control Solenoid Circuit High on Bank 2, meaning the circuit voltage is higher than expected.
2. What are the common symptoms of the P0083 code in a Hyundai?
Symptoms include a check engine light, reduced engine performance, rough idling, poor fuel economy, or difficulty starting the engine.
3. What causes the P0083 code in a Hyundai?
Common causes include a faulty intake valve control solenoid, damaged wiring or connectors, short circuits, or issues with the engine control module (ECM).
4. How is the P0083 code diagnosed in a Hyundai?
A technician will use a scan tool to read the code, inspect the intake valve control solenoid and its wiring, and test the circuit for continuity and proper voltage.
5. Can I drive my Hyundai with the P0083 code?
Driving with this code is not recommended as it can lead to reduced engine performance and potential damage to the engine over time.
6. How do you fix the P0083 code in a Hyundai?
Repairs may involve replacing the intake valve control solenoid, repairing damaged wiring or connectors, or updating/reprogramming the ECM if necessary.
7. What tools are needed to fix the P0083 code?
You may need an OBDII scanner, a multimeter for electrical diagnostics, and basic tools to replace the solenoid or repair wiring.
8. How much does it cost to fix the P0083 code in a Hyundai?
Repair costs vary but typically range from $150 to $400, depending on whether the solenoid, wiring, or ECM needs repair or replacement.
9. What is Bank 2 in the context of the P0083 code?
Bank 2 refers to the side of the engine opposite Bank 1, which contains cylinder 1 in V6 or V8 engines.
10. How can I prevent the P0083 code in my Hyundai?
Regular maintenance, such as inspecting and cleaning engine components, checking for wiring damage, and using quality engine oil, can help prevent this issue.
Discuss the causes and fixes for P0083 Hyundai OBDII Code
Code P0083 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
