P0077 Subaru Code - Intake Valve Control Solenoid Circuit High Bank 1
Quick Answer
The intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Bank 1 harness is open or shorted, Intake Valve Control Solenoid Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0077 Subaru indicates Intake Valve Control Solenoid Circuit High Bank 1.
- Common causes
- Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Bank 1 harness is open or shorted, Intake Valve Control Solenoid Bank 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0077 Subaru Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through the intake valve timing control unit or stops the oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0077 Subaru?
- Faulty Intake Valve Control Solenoid Bank 1
- Intake Valve Control Solenoid Bank 1 harness is open or shorted
- Intake Valve Control Solenoid Bank 1 circuit poor electrical connection
How to Fix the DTC P0077 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0077 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0077 Subaru code?
Need more information on how to fix the P0077 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0077 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0077 Subaru Code
1. What are the common symptoms of OBDII code P0077 in a Subaru related to the Intake Valve Control Solenoid Circuit High Bank 1?
- Common symptoms include rough idling, decreased fuel efficiency, and potential engine misfires.
2. What are the possible causes of OBDII code P0077 in a Subaru?
- The possible causes include a faulty intake valve control solenoid, wiring issues, or a problem with the engine control module (ECM).
3. How can I diagnose the Intake Valve Control Solenoid Circuit High Bank 1 issue in my Subaru?
- You can diagnose the issue by performing a visual inspection of the wiring and connectors, testing the solenoid for proper operation, and using a scan tool to read the fault codes.
4. Can a DIY enthusiast repair the Intake Valve Control Solenoid Circuit High Bank 1 problem in a Subaru?
- Depending on the root cause, some DIY enthusiasts may be able to replace the intake valve control solenoid or repair wiring issues themselves. However, it's recommended to consult a professional for accurate diagnosis and repair.
5. Is it safe to continue driving my Subaru with OBDII code P0077 present?
- It is not recommended to drive your Subaru with OBDII code P0077 present, as it can lead to further damage to the engine and potentially affect its performance.
6. How much does it typically cost to repair OBDII code P0077 in a Subaru?
- The cost of repairing OBDII code P0077 can vary depending on the exact cause of the issue, but it may range from $150 to $500 for parts and labor.
7. Can a faulty Intake Valve Control Solenoid cause other OBDII codes to appear in a Subaru?
- Yes, a faulty Intake Valve Control Solenoid can cause other related codes to appear, such as P0076 (Intake Valve Control Solenoid Circuit Low Bank 1) or P0078 (Intake Valve Control Solenoid Circuit High Bank 2).
8. How important is it to address OBDII code P0077 promptly in a Subaru?
- It is important to address OBDII code P0077 promptly to prevent potential engine damage, ensure optimal performance, and maintain fuel efficiency in your Subaru.
9. Can a Subaru dealership or auto repair shop reset the OBDII code P0077 after the issue is fixed?
- Yes, a Subaru dealership or auto repair shop can reset the OBDII code P0077 using a scan tool after the underlying issue has been repaired.
10. Are there any preventive maintenance tips to help avoid OBDII code P0077 in a Subaru?
- Regularly inspecting and maintaining the intake valve control solenoid, checking the wiring harness for any signs of wear, and keeping up with routine engine maintenance can help prevent OBDII code P0077 from occurring in your Subaru.
Discuss the causes and fixes for P0077 Subaru OBDII Code
Code P0077 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
